Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Norwalk
Roof replacement in Norwalk usually runs $9,000 – $16,500 for a typical 1,200 – 1,600 square foot single-story tract home with asphalt shingles, and the tear-off almost always reveals more than the homeowner expected. We’re not being dramatic when we say the sheathing under those original 1950s-60s roofs is often the real story, not the shingles. Hollywood Roofing Co has torn off and rebuilt roofs across 90650, 90651, 90652, and 90659 for years, and we know exactly what’s under the surface here. Call (833) 589-7971 to get a written estimate that accounts for what we’ll actually find, not what a generic bid hopes we won’t.
Why Hollywood Roofing Co Is Norwalk’s Preferred Roof Replacement Company
Norwalk homeowners call us because we’ve worked enough roofs between Studebaker, Norwalk Blvd, and Alondra to know what a mid-century tract home hides under its first layer. We’re not guessing. Roland Vega built this company on the idea that a roof replacement should be honest about what’s underneath, and that’s a big deal when you own a house built in 1958 or 1962. Our customers in Norwalk keep referring neighbors to us because we show up with a full material list, a square count, and a line-item breakdown that doesn’t change unless the decking genuinely needs more work than the original quote allowed for.
We install seven major roofing brands (GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral), so when we recommend a shingle for your roof, it’s because it’s right for your house, not because it’s the only product we stock. Reviews from our Norwalk jobs consistently mention the same two things: the crew kept the property clean and the final number matched the quote. You can’t fake that after fifteen roofs on the same street.
Response time to Norwalk is straightforward: we schedule a free estimate within a day or two, and we don’t treat the inspection like a sales pitch. We measure, we document, we give you a written scope. Then you decide. When you call (833) 589-7971, you’re reaching a company that has done this exact job in your ZIP code more times than we can count.
Styles & brands we work with
Roof Installation in Norwalk
Roof installation in Norwalk means tearing off whatever the original builder put down in 1957, 1962, or 1974, and then rebuilding the roof system the right way for an inland basin climate. If your home has never been re-roofed, the first step is almost always replacing the decking on sections where 7/16-inch plywood has softened from trapped heat, and laying new underlayment rated for sustained UV exposure. You’ll pay somewhere in the $9,000 – $16,500 range depending on square count, slope, and how much sheathing goes, and that’s the honest math for this city’s housing stock.
Decking That Doesn’t Make It Through Tear-Off
Original 3/4-inch or 7/16-inch sheathing from the Eisenhower and Kennedy eras was installed before anyone thought much about attic ventilation. By the time we pull the old shingles, the south and west-facing slopes have been cooking for sixty summers. The plywood delaminates, the underlayment crumbles like old paper, and what looked fine from the attic is gone at the edges.
Low-Pitch and Flat Section Handling
A lot of Norwalk homes have flat-roof sections over additions, garages, or breezeways. These need a different membrane approach than the main gable or hip roof, and we spec the transition details carefully. We also chase ventilation on these houses. Most were built with soffit vents only, maybe a couple of passive caps, and a new roof without better airflow is a shortened roof.
Roof Replacement Contractor in Norwalk
Roof Replacement Contractor work in Norwalk follows a pattern that’s almost predictable once you’ve done enough houses here: the tear-off exposes problems nobody bid for, the original flashing is corroded, and the homeowner needs someone who can pivot without inflating the price. Hollywood Roofing Co handles the entire Roof Replacement process from first nail to final inspection, and we carry the full material spread so you’re not locked into one manufacturer. A typical full replacement in Norwalk on a tract house runs $10,500 – $14,000 once you account for re-decking, new drip edge, and ventilation upgrades, and we write the quote with those line items visible from day one.
Salt Air on an Inland Roof
Norwalk sits close enough to the coast that marine air moves through the basin, especially during morning low clouds and onshore flow. That salt doesn’t soak the roof, but it does accelerate corrosion on standard galvanized flashing, fasteners, and drip edge, especially at valleys and pipe penetrations. We spec stainless or hot-dip galvanized hardware on replacement roofs in Norwalk, and we don’t consider it an upsell. It’s what keeps the roof from leaking at the seams ten years in.
Working With Tract Home Geometry
The majority of Norwalk roofs are low-pitch hips or gables with shallow eaves and minimal overhang. That geometry sheds water fine until wind-driven rain pushes under the shingle edges, which is exactly what happens during Santa Ana events. We nail to high-wind specs on the eaves and rakes, use starter strips correctly, and seal the valleys. It’s not exotic work, but it has to be done deliberately, and it’s one reason a re-roof here isn’t the same as a re-roof in a newer inland development with steeper pitches and deeper overhangs.
Trusted Brands We Service in Norwalk
We install GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, which means we can match the shingle to your budget and your roof’s slope without bending the facts. A budget-conscious Norwalk homeowner might do well with a Tamko or IKO line and still get a 30-year architectural profile. If you want the strongest wind rating and the deepest color depth, CertainTeed Landmark or GAF Timberline usually earns the recommendation. We keep common accessory stock local to our SoCal yard, so the trim, ridge cap, and ventilation components for a Norwalk job don’t have to be special-ordered in from across the country. Seven leading brands. One honest recommendation.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Norwalk Homes
- Heat-baked underlayment that crumbles during tear-off: On original 1950s and 60s roofs, the felt paper under the shingles has been cooked to dust on south-facing slopes. A cheap single-layer bid doesn’t budget for this, and the homeowner gets a surprise change order mid-job.
- Thin original decking that fails the nail test: Much of Norwalk’s housing stock was built with 7/16-inch plywood or even spaced-board sheathing. After sixty years, large sections need to be re-decked before the new shingles can be nailed per manufacturer spec.
- Corroded flashing at valleys and penetrations: Salt-laden onshore air and the dry-season heat cycle work on cheap galvanized metal. Valley flashing, pipe boots, and chimney flashings are typical replacement points we find during every Norwalk tear-off.
- Almost no functional attic ventilation: These low-pitch hip roofs were built with a soffit vent or two and nothing else. Attic temps above 140°F cook the new shingle from underneath, shorten its life, and raise cooling bills. We add ridge and intake venting on nearly every replacement we do here.
Pricing for Roof Replacement in Norwalk, CA
Let’s put honest numbers on the table for Norwalk. A complete tear-off and re-roof on a typical 1,200 – 1,600 sq ft single-story tract home runs $9,000 – $16,500, with most jobs landing between $10,500 and $14,000 once re-decking, flashing replacement, and ventilation are included. The shingle itself is a smaller piece of the total than most people think. What moves the number here is sheathing replacement: a house that needs 18 sheets of new plywood will cost more than one that needs four. Material choice matters too. Architectural shingles from Tamko or IKO run less than premium lines from CertainTeed or GAF, but the labor, disposal, and decking costs are the same regardless. The price difference between a basic three-tab job and a high-end architectural job on the same house is usually $1,500 – $3,000. The difference between doing the decking right and ignoring it is measured in roof life. Call (833) 589-7971 for a free written estimate scoped to your square count and actual deck condition.
We Also Serve Cities Near Norwalk
Hollywood Roofing Co works throughout southeast LA County, including Cerritos, Artesia, Bellflower, and Santa Fe Springs. If your home is in one of those neighboring cities, the same crew, same material selection, and same approach to honest decking assessments applies. See our full coverage across Norwalk and the surrounding area to schedule an estimate where you are.
Serving Norwalk, CA — Our Local Coverage Area
We’re based in the Norwalk area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Norwalk
Because Norwalk’s original 1950s-60s tract roofs hide thin decking and heat-baked underlayment that no one can fully see until the old shingles come off. On a 1962 single-story stucco tract house off Studebaker Road in the 90650 ZIP, our crew pulled the original three-tab layer and found the 7/16-inch decking soft and the old underlayment baked brittle across the whole south-facing slope. We re-decked the bad runs, laid ice and water shield in the valleys and along the fascia-to-deck transition, set new drip edge, and nailed GAF architectural shingles to spec with a ridge vent to finally move attic heat. The homeowner got a roof that vents and drains the way the original never did. Your quote climbs only if the decking genuinely fails, and we’ll show you the bad boards before we replace them. Call (833) 589-7971 for an estimate that includes a realistic decking allowance.
You need corrosion-resistant metal, yes, and in Norwalk that means hot-dip galvanized or stainless flashing and fasteners at minimum. The city sits far enough inland that you won’t see the continuous salt spray of a Huntington Beach roof, but the marine air that moves through the basin on morning low clouds still carries enough salt to accelerate corrosion on standard electroplated flashing. We’ve pulled valley metal on 20-year-old Norwalk roofs that looked like Swiss cheese, while the shingles themselves were still fine. The inland-spec bid skips this detail to look cheap. Ten years later, the roof leaks at the valleys and the same homeowner pays for repairs. We spec the right metal on every replacement because it costs a few hundred dollars up front and saves thousands on the back end. Reach us at (833) 589-7971 to see the hardware line items in a written quote.
A square is 100 square feet of roof area, and most Norwalk tract homes run between 12 and 18 squares depending on the year built and whether there’s an addition or garage with flat sections. Knowing your square count matters because two bids can quote the same house at wildly different numbers if one contractor measured the actual roof and another eyeballed it from the street. We measure from the roof itself, document the slope, the ridge length, the valleys, and the penetrations, and then we write the quote per square so you can compare ours to a competitor’s apples-to-apples. If a bid doesn’t include a square count, ask for one. The roofer who can’t tell you how many squares your roof is hasn’t actually measured it. Call (833) 589-7971 for a detailed, measured estimate.
A replacement on that roof should include new intake and exhaust ventilation sized to the attic’s square footage, and on a 1960s Norwalk hip roof that usually means continuous soffit vents plus a ridge vent or a series of low-profile caps. The original build likely had one or two passive vents total, which is why attic temperatures in Norwalk can hit 140°F or higher in the summer. That heat bakes the new shingle from underneath and cuts years off its life. We add ridge venting on nearly every replacement we do in Norwalk because the roof without it fails sooner, and the homeowner pays twice. The ventilation upgrade typically adds $400 – $1,200 to the job, and it’s the cheapest life extension you’ll ever buy for a roof. For a quote that includes ventilation, call (833) 589-7971.
Yes, if they’re nailed to high-wind specification on the eaves, rakes, and ridges, and if the starter strip and valley details are done correctly. Norwalk doesn’t get the extreme gusts of the foothill canyons, but Santa Ana events regularly push 40 – 60 mph winds through the flat corridors of the city, and that’s enough to lift and crease shingles that were nailed too high or with the wrong pattern. We nail architectural shingles with six nails per shingle on the perimeter zones and use the manufacturer’s high-wind installation pattern across the field, which is what GAF, CertainTeed, and Owens Corning all require for their wind-rated warranties. That’s not an upsell; it’s the difference between a roof that lasts and a roof that loses shingles the first time the winds kick up. Call (833) 589-7971 to discuss wind-rated installation for your Norwalk roof.
Written by Roland Vega, Owner at Hollywood Roofing Co, serving Norwalk and southeast LA County with roof inspections, repairs, and full replacements across seven major material brands.