Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Santa Fe Springs
A full roof replacement in Santa Fe Springs typically runs $11,000 – $19,000 for a standard 1,500 – 2,200 sq ft single-family home with architectural shingles, and $16,000 – $28,000 when new decking is required beneath. That second number matters here more than in most cities, because homes built in the 1950s through 1970s often sit on original skip sheathing or 1×6 boards, not plywood. Once we tear off the old shingles, we see what’s actually underneath, and in Santa Fe Springs that discovery drives the final price more than any other factor.
Hollywood Roofing Co serves the full 90670 and 90671 zip codes, from the residential streets near Telegraph Road down to the pockets around Pioneer Boulevard and Los Nietos Road. We know this city’s split personality: pitched shingle roofs on mid-century homes a few blocks from massive low-slope commercial buildings. That mix shapes how we bid, what we stock, and how quickly we can get a crew to your street. Call (833) 589-7971 to schedule a free replacement estimate.
Key Takeaways:
- Santa Fe Springs roof replacement runs $11,000 – $19,000 (shingles) or $16,000 – $28,000 (with decking replacement).
- Homes from the 1950s – 1970s often have original 1×6 or skip sheathing that fails inspection once exposed.
- We document every hidden-framing surprise with a written change order before any work proceeds.
- We install all seven major brands, so the shingle recommendation matches your home, not a supplier contract.
Why Hollywood Roofing Co Is Santa Fe Springs’s Preferred Roof Replacement Company
Santa Fe Springs homeowners call us because we don’t flinch at what a tear-off uncovers. Mid-century decking, settled stucco, old flashing details that were questionable even when they were installed. These are normal findings here, and we treat them as part of the job, not an excuse to inflate a bill. The estimate you approve before we start is built around what we expect to find on a home of your era, with allowances written in for the decking, fascia, and flashing repairs that older Santa Fe Springs roofs typically need.
Our Roof Replacement team works across the whole roofing lifecycle. We inspect, repair, and replace, which means the person who tells you what your roof needs is the same crew that does the work. No handoffs, no finger-pointing. When a Santa Fe Springs homeowner calls with a leaking 1960s ranch house, we can send an inspector who understands exactly what that build is likely hiding under the shingles.
Roland Vega leads our crew with a straightforward approach: document everything, price it honestly, and get the homeowner’s written approval before any change adds cost. That’s how we’ve handled replacements near Norwalk Boulevard, in the neighborhoods west of the 605, and across both zip codes, and it’s why our customers feel confident recommending us to neighbors.
Styles & brands we work with






Asphalt Shingle Roof Replacement in Santa Fe Springs
Asphalt Shingle Roof Replacement is the most common replacement job we do in Santa Fe Springs, and the mid-century housing stock here makes it a specific kind of project. Most homes in the 90670 and 90671 zip codes were roofed originally with three-tab shingles over skip sheathing, which means a straightforward shingle swap is rarely straightforward. The shingle is the finish layer. What’s underneath determines whether the job holds up for 25 years or starts sagging in five.
On a typical 1,400 – 1,800 sq ft home, a full asphalt shingle replacement in Santa Fe Springs runs $9,500 – $14,500, assuming the decking underneath is sound. If we find the original 1×6 or skip boards cracked, nail-sick, or delaminating, decking replacement adds roughly $2.50 – $4.00 per square foot. That’s not an upsell. It’s what the building code requires before new underlayment can be installed.
What Gets Replaced Beneath the Shingles
Before any new shingle goes down, we inspect the deck, the flashing, and the attic ventilation. On a 1960s Santa Fe Springs home, the original skip sheathing often has gaps wide enough to let the underlayment bridge and tear. We write a line item for new 7/16-inch OSB decking when that’s what the inspection shows, and you approve it in writing before we order materials.
Architectural Shingles vs. Three-Tab on Older Homes
Most Santa Fe Springs homeowners choose architectural shingles now, and for good reason. They carry a thicker profile, hide minor deck unevenness better than three-tab, and handle the inland heat and Santa Ana wind gusts with less edge lifting. GAF Timberline HDZ and CertainTeed Landmark are the two architectural lines we install most often here. Tamko’s Heritage line is a solid value option when budget is the deciding factor.
New Roof Installation in Santa Fe Springs
New Roof Installation in Santa Fe Springs covers two very different situations: a full replacement on an existing mid-century home, or a roof on new residential construction along the city’s redeveloping lots. The replacement route is more common, and it starts with a tear-off that often reveals the home’s original decking from the Eisenhower or Nixon years. The new-construction route is cleaner, but it still demands the same attention to ventilation, flashing, and UV-rated materials this climate demands.
For a new roof installation on an existing Santa Fe Springs home, expect $12,000 – $20,000 for architectural shingles on a 1,600 – 2,200 sq ft footprint, including typical decking repair allowances. New construction runs slightly lower per square foot because there’s no tear-off or hidden decking surprise, though the exact figure depends on the roof geometry and the material line you choose.
Decking Replacement Is the Local Variable
In cities like Whittier or Downey, many homes have already been re-decked with plywood or OSB during past reroofs. Santa Fe Springs is different. A large share of the 1950s – 1970s stock still has the original 1×6 tongue-and-groove or skip sheathing, and it’s usually at end-of-life. When a contractor’s bid doesn’t include a decking allowance, the price that comes back after tear-off is going to hurt. We build that allowance into our written estimate from day one.
Membrane Systems for Flat and Low-Slope Sections
Many Santa Fe Springs homes, especially those with additions, carports, or porch roofs, have flat or low-slope sections attached to the main pitched roof. New roof installation here often means pairing architectural shingles on the main slope with a TPO or PVC membrane on the flat section. We quote both in the same walkthrough, so there’s no separate contractor or separate bid to juggle later.
Trusted Brands We Service in Santa Fe Springs
We’re not locked into one manufacturer’s product line, and that matters in Santa Fe Springs because the right roof depends on your roof’s shape, your attic’s ventilation, and your budget, not on what a supplier happens to stock. Hollywood Roofing Co installs GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, across premium, mid-range, and value tiers. For a mid-century home in the 90670 zip code, we might recommend a GAF Timberline HDZ for wind uplift resistance and UV stability. For a budget-conscious rental property near Pioneer Boulevard, Tamko’s Heritage line often makes more sense. Boral’s tile profiles show up on a few of the higher-end Santa Fe Springs properties where the original tile is too far gone to spot-repair. We keep common replacement materials staged for fast turnaround on Santa Fe Springs jobs.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Santa Fe Springs Homes
- Original decking delamination and nail-pull. The 1×6 and skip sheathing installed on 1950s – 1970s homes loses its grip on fasteners after decades of thermal cycling. We find cracked, split, and nail-sick boards most often in the valleys and at rakes, exactly where water wants to go.
- Improper or deteriorated flashing at wall intersections. Stucco and fascia settle over time, pulling flashing loose at the exact spot where roof planes meet vertical walls. Water gets in, rots the sheathing and fascia from the inside, and the homeowner doesn’t see it until the roof comes off.
- Ventilation that never worked well in the first place. Older Santa Fe Springs homes often have minimal soffit intake and undersized ridge or gable exhaust. Heat builds in the attic, cooks the underlayment, and shortens shingle life even when the shingle itself is rated for high UV exposure.
- Flat-roof ponding on mid-century additions. The low-slope sections found on many local homes, especially enclosed patios and carports, hold water long after rain stops. That ponding degrades membrane seams and eventually leaks into the interior where the flat section ties into the pitched roof.
Pricing for Roof Replacement in Santa Fe Springs, CA
A full roof replacement in Santa Fe Springs on a typical 1,600 sq ft single-family home runs $11,000 – $19,000 for architectural shingles, including the tear-off, underlayment, flashing, and standard ridge vent. That range assumes the existing decking is sound. When we need to replace original 1×6 or skip sheathing, the job lands between $16,000 and $28,000. Flat or low-slope membrane sections add significant cost because they’re a different system entirely.
The single biggest cost variable in this city is what we find under the old shingles. Homes near Florence Avenue and Norwalk Boulevard in particular have shown a high rate of original decking that can’t be reused. We account for that in the estimate before we start, so the number we sign isn’t a fantasy. Call (833) 589-7971 to schedule a free replacement estimate and get a written line-item breakdown for your specific roof.
We Also Serve Cities Near Santa Fe Springs
Hollywood Roofing Co runs crews across the greater Southeast Los Angeles and Gateway Cities area, including Santa Fe Springs, West Whittier-Los Nietos, Downey, Pico Rivera, and South Whittier. If your home sits in one of these nearby cities and needs a replacement, the same seven-brand material options and the same written change-order discipline apply. Your estimate reflects your city’s actual housing stock, not a one-size-fits-all formula.
Serving Santa Fe Springs, CA — Our Local Coverage Area
We’re based in the Santa Fe Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Santa Fe Springs
It’s possible, though less common than in cities with a high concentration of 1920s – 1940s homes. Some mid-century underlayments and felt papers did contain asbestos, and if we suspect it during the tear-off, we stop, test, and bring in a licensed abatement contractor before we continue. We won’t cut through suspect material without testing, and we won’t hide the finding from you or the city. Call (833) 589-7971 to talk through what your home’s era is likely to have.
We document it, photograph it, price the repair, and get your written approval before we touch it. On Santa Fe Springs homes where the original 1×6 or skip sheathing is cracked or nail-sick, we write a change order for new 7/16-inch OSB decking, install ice and water shield in the valleys, and proceed only after you sign. You’ll never get a final invoice that surprises you, because every change is approved first. For an exact decking allowance on your home, call (833) 589-7971 for a free estimate.
Sometimes, yes. When the roof is open, the city inspector may flag attic access, ventilation, or structural issues that need correction before the final sign-off. We build a small allowance into our estimates for exactly this scenario, and we tell you what the inspector may ask for on your particular home’s era. Our replacement estimates in the 90670 and 90671 zip codes include realistic contingency language, not a zero-allowance quote that falls apart at inspection.
Architectural shingles are for pitched roofs, generally 3:12 and steeper, and they’re the dominant choice on Santa Fe Springs single-family homes. Flat or low-slope sections under 3:12 need a membrane system, typically TPO or PVC, because shingles won’t shed water properly at low pitch. Many local homes have both: shingles on the main roof, membrane on the carport or addition. We quote both systems in one estimate so you’re not coordinating two contractors.
Santa Fe Springs sits inland far enough from the coast that roofs get pounded by UV through long dry summers, and the Santa Ana winds drive uplift at edges and ridges. We specify architectural shingles with higher wind ratings, add proper edge and ridge fastening, and make sure attic ventilation is actually moving air. Those choices add a few hundred dollars to a typical job and add years to the roof’s life in this climate. Call (833) 589-7971 and we’ll walk your roof with you and show you exactly what we mean.
Written by Roland Vega, Owner at Hollywood Roofing Co, serving Santa Fe Springs and the surrounding Southeast Los Angeles area.