Roof Repair in Beverly Hills — Free Roof Inspection, Written Price

Fast, Reliable Roof Repair Across Beverly Hills

Roof repair in Beverly Hills usually costs between $650 and $2,800 for most targeted fixes, while a full tile lift-and-relay over new underlayment on a Spanish Colonial or Mediterranean villa typically runs $9,800 to $24,000. That’s the honest range before anyone looks at your roof. We’re the team homeowners call when a leak shows up off North Bedford Drive or a Santa Ana wind event cracks barrel tile above the 90210 hillside streets. Hollywood Roofing Co handles everything from a single flashing rebuild to a full underlayment replacement with original tile re-laid, and our crews know which Beverly Hills neighborhoods face design-review requirements before a single nail goes in. Call (833) 589-7971 and we’ll walk the roof with you.

Call (833) 589-7971

Why Hollywood Roofing Co Is Beverly Hills’s Preferred Roof Repair Company

Beverly Hills homeowners don’t call us because we’re the only option. They call because our crews have spent years working on the exact roof types that dominate this city: original clay barrel tile from the 1920s and 1930s on the Flats, low-slope membrane systems on condo buildings along the 90211 and 90212 southern edges, and custom estate roofs up in 90210. That familiarity matters when a repair has to be invisible from the street. Design-review boards and the Cultural Heritage Commission don’t care about a roofer’s good intentions; they care whether the replacement tile matches the original in profile, color, and finish. We know how to source reclaimed barrel tile and how to document compliance before work starts.

Roland Vega, our owner, has built the company around one principle: inspect honestly, repair precisely, and never push a replacement when a targeted fix gets the job done. That approach earns repeat calls from Beverly Hills property owners and property managers who’ve been burned by sealant-patch jobs that fail at the next winter rain. Our Roof Repair team works with seven material brands, which means the recommendation you get is matched to your roof, not to a supplier’s inventory. Need a flat membrane patch on a 90212 condo building? We’ll quote it. Need a full lift-and-relay on a North Maple Drive villa? We’ll quote that too, line by line.

Commercial Roof Repair in Beverly Hills

Commercial roof repair in Beverly Hills covers the flat and low-slope membrane roofs on condo buildings, apartment complexes, and mixed-use properties concentrated along the 90211 and 90212 corridors and the commercial stretches south of Santa Monica Boulevard. These jobs usually run $1,200 to $6,800 depending on the membrane type, the number of penetrations, and whether the repair is a patch-and-patch or a more thorough seam and flashing rebuild. On a commercial roof, the goal is to stop the leak without disrupting tenants and to extend the remaining service life of the membrane rather than rushing a replacement.

Membrane Patch and Seam Repair

A tired TPO or modified bitumen roof on a Beverly Hills condo building typically fails at seams, penetrations, or pooled-water areas first. We cut back the failed section, remove moisture-laden insulation where found, and tie in the new membrane with proper surface prep and heat welding or cold adhesive. This is a different job than a tile repair on the Flats: no design review, but the building’s HOA or property manager usually needs a written scope and a clean, business-hours execution plan.

Penetration and Flashing Rebuilds

HVAC curbs, vent stacks, and drain collars are where most commercial roof leaks in 90211 and 90212 actually start. We rebuild the flashing, replace any rotted curb wood, and re-secure the penetration with the correct sealant and membrane tie-in. The repair range for this kind of focused work on a commercial roof in Beverly Hills is typically $900 to $3,400.

Roof Leak Repair in Beverly Hills

Roof leak repair in Beverly Hills most often traces back to one of three places: failed felt underlayment beneath intact clay barrel tile, worn flashings at chimneys and dormers, or cracked tile at valleys and penetrations on hillside homes exposed to Santa Ana wind. The leak repair itself commonly runs $350 to $1,800 when the source is a single flashing or a handful of cracked tiles. When underlayment has failed across a section of the Flats, a proper repair is a lift-and-relay of the existing tile over new underlayment, which sits in the $4,800 to $12,000 range for a typical villa roof plane.

Underlayment Failure Beneath Sound Tile

This is the classic Beverly Hills leak on 1920s and 1930s Spanish Colonial homes. The original clay barrel tile on the Flats often outlives its felt underlayment by decades. Water gets past the tile during a heavy winter rain, hits the failed felt, and shows up inside at the ceiling or wall line. Surface sealant won’t fix this. The tile has to come up, the old underlayment stripped, and new underlayment plus ice and water shield installed through the valleys and penetrations before the original barrels go back down.

Flashings at Chimneys, Dormers, and Valleys

On hillside estates and Flats villas alike, the metal flashings where a roof meets a chimney, dormer wall, or valley are the first components to go. Santa Ana winds loosen them, summer heat cooks the sealant, and winter rain finds the gap. We rebuild step and counter flashings, replace valley metal where it’s rotted, and reset drip edges so water sheds away from the fascia. Simple flashing repairs in Beverly Hills generally run $350 to $1,400, while a valley rebuild with new metal is closer to $900 to $2,200.

Trusted Brands We Service in Beverly Hills

We service roofs built with CertainTeed, Owens Corning, IKO, and Atlas materials, and we’re an authorized installer across all seven major roofing brands, including GAF and Boral. That matters in Beverly Hills because matching an existing roof often means sourcing from the right manufacturer, not just the one our supplier happens to stock. For a flat membrane patch on a 90212 condo building, CertainTeed or Owens Corning TPO gets the call. For a hillside composite or asphalt section on a mid-century estate, Atlas or IKO shingles match cleanly. Our local parts sourcing and relationships with regional distributors mean Beverly Hills customers aren’t waiting on a delivery from three states away for standard repair components.

Common Roof Repair Problems We See in Beverly Hills Homes

• Failed underlayment beneath sound clay barrel tile. The original tile on a 1920s Flats villa can be in excellent shape while the felt below it has turned to dust. The fix is a lift-and-relay, not a tear-off, and any visible roof plane may require city design review.
• Cracked barrel tile from Santa Ana wind and summer heat. Hot, dry summers bake clay tile until it’s brittle, then a strong Santa Ana pushes debris across the roof and snaps pieces. We source matching reclaimed or new barrel tile so the repair blends from the street.
• Flashing failures at chimneys and dormers on hillside estates. The 90210 ridge-top homes above the Flats take constant wind exposure. Flashing loosens, sealant breaks down, and the next winter rain intrudes at the walls and chimneys.
• Low-slope and flat roof ponding on 90211 and 90212 buildings. Condo and apartment buildings along the southern edges of Beverly Hills often suffer ponding water at drains and scuppers. The membrane wears out at those spots first, and repairs have to address drainage, not just the hole.

Pricing for Roof Repair in Beverly Hills, CA

We Also Serve Cities Near Beverly Hills

Our crews work throughout Beverly Hills and the surrounding communities. If your roof sits in Century City, West Hollywood, Culver City, or Hollywood, the same team and the same seven-brand material access apply. Different housing stock, same honest repair approach, and the free estimate stands at the same number: (833) 589-7971.

FAQs About Roof Repair in Beverly Hills