Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Culver City
Roof repair in Culver City usually costs between $450 and $1,800 depending on what failed, with simple shingle replacements on the low end and full flashing or underlayment work on the high end. Most jobs take one to two days once we’re on site. We work across all of Culver City, from Carlson Park to Fox Hills, and we carry parts for the tile, shingle, and flat membrane systems this city actually has. Call (833) 589-7971 and we’ll schedule a time to look at the roof, tell you what’s actually wrong, and quote the repair honestly.
What makes Culver City different from most of Los Angeles is that the same roof can have two completely different problems at once. Salt air off the coast corrodes fasteners on the west-facing slope while the inland sun bakes sealant on the south-facing slope until it cracks. A repair spec that only accounts for one of those fails within a few years. We’ve been working roofs here long enough to know which failure you’re actually dealing with before we open the estimate.
Why Hollywood Roofing Co Is Culver City’s Preferred Roof Repair Company
Culver City is a small city, about five square miles, but the roof stock is unusually varied. One block of Carlson Park has 1920s Spanish Colonials with original clay tile. Two streets over there are mid-century ranches with composition shingle. Down by the Expo Line corridor, flat membrane roofs dominate the mixed-use buildings. Most roofing companies pick a specialty and stick to it. We repair all of it because Culver City demands all of it.
Roland Vega, who runs Hollywood Roofing Co, built the company around a simple idea: carry materials from multiple top brands so the recommendation fits the home, not our inventory. We’re authorized installers for GAF, CertainTeed, Owens Corning, and IKO, among others, which means we can match what’s already on your roof instead of telling you to replace everything with whatever we stock. That matters a lot in a city where historic preservation review can limit what you’re allowed to change.
Our Roof Repair team reaches every Culver City zip code, 90230 through 90233, typically within one to two business days for non-emergency calls. We carry stainless steel fasteners and marine-grade flashing on our trucks specifically because of the salt-air corrosion we see here. You won’t wait a week for us to order the right parts.
Styles & brands we work with
Flat Roof Repair in Culver City
Flat Roof Repair in Culver City typically runs $600 to $2,400 depending on whether we’re patching a membrane, replacing flashing around a drain or penetration, or re-sealing seams on an older modified bitumen roof. The flat and low-slope roofs concentrated along Washington Boulevard and the redeveloped lots near the Culver City station take a beating from the marine layer. Persistent morning damp settles into every seam, and if the sealant was applied with a cheap caulk instead of a UV-stable polyurethane, the sun cracks it within two or three seasons.
Membrane Patching for Low-Slope Roofs
Older built-up and modified bitumen roofs in Culver City’s commercial corridor and the adjacent residential streets tend to fail at seams and around drains first. We cut back the failed area, dry it thoroughly, and apply a compatible patch with proper torching or cold-applied adhesive. Marine-layer moisture means we don’t patch over damp substrate, it will fail. We use a moisture meter to confirm the deck is dry before we close anything up.
Flat Roof Flashing and Drain Repair
On mixed-use buildings, the most common call is water ponding around a clogged drain or a rusted scupper. We clear the debris, repair or replace the flashing, and re-slope the immediate area if needed. The goal is to move water off the roof, not hold it while the next marine layer rolls in.
Shingle Roof Repair in Culver City
Shingle Roof Repair in Culver City usually lands between $450 and $1,400. A single missing shingle from wind uplift is the cheap end. A larger section where shingles have lifted and the underlayment has been exposed to our wet-dry cycles is the higher end. Culver City’s mid-century tract ranches, especially in the 90230 and 90232 zips, have a lot of aging composition shingle roofs. The dominant repair call is cracked or missing shingles after a Santa Ana wind event, often on the eaves and ridges.
Wind-Damaged Shingle Replacement
Santa Ana winds push from the northeast and hit Culver City’s exposed roof edges hard. Shingles that were nailed too high or with the wrong fastener tear loose. We replace the damaged section, re-nail adjacent shingles that have lifted, and check the entire slope for nail pops and loose tabs. If the original roof used staples instead of nails, we usually recommend a broader re-fasten so the same wind doesn’t tear it again.
Shingle Sealant and Granule Loss
Sun on the south-facing slopes bakes the sealant strip between shingle courses until it releases. Then moisture from the marine layer creeps underneath. We re-seal lifted tabs, replace shingles that have lost too much granulation, and treat the underlayment if it’s been exposed. Ficus and jacaranda debris holds moisture against the shingle surface and accelerates this. Keeping tree overhang trimmed is part of a repair that actually lasts.
Trusted Brands We Service in Culver City
We repair and replace materials from CertainTeed, Owens Corning, IKO, Atlas, and other top manufacturers. That matters in Culver City because the housing stock pulls from every era. A 1930s tile roof in Carlson Park, a 1960s shingle roof in Fox Hills, and a flat modified bitumen roof near the Expo Line all need different brands and compatible repair components. We carry those components on our vehicles so we aren’t waiting on a supplier. If your roof has an Owens Corning shingle or an IKO membrane, we can match it without improvising a mismatch.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Culver City Homes
- Fastener corrosion on the ocean-facing slope. Zinc and electro-galvanized nails rust through in the salt-laced moisture. Tiles slip, shingles lift, and leaks start. We replace with stainless steel fasteners that don’t fail the same way.
- Sealant cracking around penetrations. Intense sun heats pipe boots, vent collars, and flashing joints until the sealant hardens and splits. Then the marine layer adds moisture into the gap. We use UV-stable sealants rated for continuous sun exposure.
- Debris buildup from the tree canopy. Mature ficus, eucalyptus, and jacaranda drop leaves and small branches that clog gutters and hold water against the roof edge. This leads to rot at the eave and backup under tiles. Removing the debris and re-securing the edge is often a full afternoon.
- Tile slippage on older Spanish and California bungalows. Original clay tiles get loose as old fasteners give way. A Santa Ana wind will find the loose ones. We re-secure with stainless steel and add underlayment in valleys and around penetrations where leaks typically develop.
Pricing for Roof Repair in Culver City, CA
Here’s what you can expect to pay for common roof repairs in Culver City. Shingle replacement: $450 to $900. Flashing repair around a chimney or vent: $500 to $1,200. Flat roof membrane patch: $600 to $1,800. Valley repair with new underlayment: $700 to $1,600. Tile re-fastening per section: $800 to $2,400. Coastal-spec hardware, stainless steel fasteners and marine-grade flashing, adds roughly 10 to 15 percent over inland-spec parts. That’s the price of not replacing the fasteners again in eight years. We quote every job as a fixed price before work starts, and estimates are free. Call (833) 589-7971 to schedule one.
We Also Serve Cities Near Culver City
Hollywood Roofing Co regularly handles roof repair across the Westside. You’ll find our crews in Ladera Heights, Century City, Venice, and Beverly Hills, often the same week we’re in Culver City. If you’re in one of those cities or anywhere in the broader Culver City area, call (833) 589-7971 and we’ll let you know when we can be there.
Serving Culver City, CA — Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Culver City
The combination of marine-layer moisture and warm sun breeds corrosion. Damp air settles into nail heads and around fastener points; then the heat accelerates the oxidation. Electro-galvanized nails, which are common on older roofs, just can’t hold up. We use stainless steel fasteners on any repair that faces the ocean side of the roof, and we recommend them throughout Culver City because the marine layer reaches far enough inland to cause the same issue block by block. If your tiles are slipping, rusted fasteners are usually the reason. Call (833) 589-7971 and we’ll confirm it during a free estimate.
Mature ficus, eucalyptus, and jacaranda trees drop leaves, flowers, and small branches onto roofs. That debris clogs gutters and valleys, holds water, and creates a shaded, damp microclimate on north slopes where moss develops. A repair that doesn’t account for the tree above it will fail again. We often include a recommendation to trim overhanging branches, and we’ll clear the roof edge as part of the work. The tree isn’t the roof’s fault, but ignoring it means paying twice.
In most cases, yes. The 1920s and 30s Spanish Colonials in Carlson Park and the downtown blocks used clay tile that’s still produced today, sometimes by the same manufacturers. We can match color, profile, and surface texture closely enough that a repaired section blends with the original. When exact tile isn’t available, we use reclaimed tile from local salvage yards that specialize in Southern California period materials. We’ll show you samples before we install anything.
Coastal-spec means stainless steel fasteners, marine-grade flashing, and sealants formulated for continuous moisture and sun. Inland-spec means standard galvanized steel and generic sealants. The coastal-spec version costs about 10 to 15 percent more on materials, but it’s the only choice that lasts in Culver City’s salt-air and UV combination. The cheap spec fails within five to eight years. The right spec goes a decade or more without another call. We quote coastal-spec as standard here.
We start by finding the actual source of water entry, which is usually a seam, drain, or penetration, not the middle of the field. Then we patch the membrane with a compatible material, repair or replace the flashing, and confirm drainage is working. On mixed-use buildings near Washington Boulevard and the Expo Line corridor, we coordinate with property managers to minimize disruption and work in defined roof sections. Estimates are always free, call (833) 589-7971 to schedule an inspection.
Written by Roland Vega, Owner at Hollywood Roofing Co, serving Culver City and the surrounding Westside communities.