Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Burbank
Roof replacement in Burbank costs between $9,800 and $24,000 for a typical 1,200 – 2,200 sq ft home, with flat roofs on older bungalows running $11,500 – $18,500 and hillside tile or shake replacements often reaching $30,000+ once fire-rated assembly and structural decking work are factored in. Our crews work in Burbank every week, from the flatlands around Magnolia Park to the steep streets above Glenoaks in the Verdugo foothills. We know the permit counter, we know the work-hour rules, and we know how to stage a tear-off on a tight lot without making enemies of the neighbors. Call (833) 589-7971 for a free, line-item estimate written for your specific roof.
Why Hollywood Roofing Co Is Burbank’s Preferred Roof Replacement Company
Burbank is a city of two roof worlds. Down in the flats, you have 1920s – 1950s Spanish and ranch bungalows with old clay tile, wood shake, and low-slope composition roofs that have been baked by decades of San Fernando Valley heat. Up in the hills above Glenoaks, you have steep-slope tile and shake roofs that get hit by Santa Ana wind events every fall. A roofer who only knows one of those worlds is going to miss something on the other. We work both, every month, and our Roof Replacement team has torn off and rebuilt roofs on streets from Chandler Park to the airport-adjacent neighborhoods in 91505 and 91506.
Homeowners here tend to ask sharp questions about fire-rated assemblies, discontinued tile profiles, and whether their insurance carrier will accept the documentation. We bring that documentation. Our workmanship is backed by manufacturer warranties through the brands we install, and we’re state-licensed and insured. Burbank building codes are specific, and we’ve navigated the overlay review process enough times to know what triggers extra scrutiny and what sails through.
Styles & brands we work with
Flat Roof Replacement in Burbank
Flat Roof Replacement in Burbank is most common on the low-slung 1950s – 70s stucco tracts and the older mixed-use blocks near downtown, where low-slope roofs dominate. These roofs fail differently than pitched roofs: the heat doesn’t just wear down shingles, it bakes the roofing membrane until it cracks, and when the first real rain hits, the leak shows up inside with no warning. A typical flat roof replacement in Burbank runs $11,500 – $18,500 depending on square footage, decking condition, and whether we’re pulling up old layers or going down to the sheathing.
Tear-Off vs. Recover
On some Burbank flat roofs, the existing membrane is still structurally sound and a recover is viable. We don’t push that option unless it’s right. More often, we find multiple old layers hiding water-damaged decking, and the honest fix is a full tear-off to the sheathing, decking repair where needed, and a new membrane system matched to the roof’s pitch and use.
What Drives Flat Roof Cost Here
Access is the big variable in Burbank. A flat roof over a garage with alley access is straightforward. A flat roof over a second story on a tight Chandler Park street where the dumpster has to sit on the sidewalk and materials come up a ladder or a small lift is a different job. We price that honestly up front, not as a surprise change order later.
Roof Installation in Burbank
Roof Installation in Burbank covers new construction and full tear-off-and-replace jobs on existing homes, and the material mix here spans more than any single-brand roofer can offer. We install seven leading brands, including CertainTeed, Owens Corning, IKO, and Atlas, so the recommendation is matched to the home’s architecture and the homeowner’s budget, not to what one supplier happens to stock. A full roof installation on a typical Burbank ranch or bungalow runs $9,800 – $24,000, with hillside properties pushing higher once fire-rated underlayment and upgraded fastening enter the scope.
New Construction Roofing
For new construction in Burbank, the roof has to pass the same wildfire-interface code review as a replacement, especially in the hills. We work with the builder’s schedule, pull the permits, and install a roof that passes the first time. That matters when the drywall crew is waiting on inspection sign-off.
Architectural Shingles for Burbank Homes
Architectural shingles are the most common choice for the 1950s – 70s tract homes in the flats. They handle the Valley heat better than three-tab, they carry higher wind ratings, and CertainTeed’s and Owens Corning’s lines include Class A fire-rated products that satisfy hillside code requirements without jumping to full tile or metal.
Trusted Brands We Service in Burbank
We’re authorized installers across seven major roofing brands, which means we stock and order components from multiple manufacturers, not just whoever gives one supplier the best margin. For Burbank homeowners, that matters when a 1940s bungalow in 91502 needs a discontinued clay tile profile matched, or when a hillside replacement in 91521 requires a Class A fire-rated underlayment system from a specific brand that the insurance carrier wants to see on the paperwork. We’re brand-agnostic with our recommendations. Seven leading brands. One honest recommendation.
Common Roof Replacement Problems We See in Burbank Homes
- Santa Ana wind damage on hillside tile and shake roofs. Steep slopes above Glenoaks catch the full force of fall wind events, lifting tiles and tearing shakes. A replacement done without upgraded fastening and edge detailing fails again at the first big gust.
- Heat-baked tile underlayment that fails without warning. Decades of 95 – 105°F summers dry out and crack the underlayment under old tile. The roof looks intact from the street, then the first real rain in a dry year triggers sudden interior leaks.
- Layered patch repairs hiding rotted decking. We regularly tear off Burbank bungalows with three or four layers of old patches over 1920s – 50s decking. The bid says one thing; the tear-off reveals rot that has to be fixed before the new roof goes down. That’s why we walk the decking condition with you before quoting.
- Discontinued tile and shake profiles. Older Burbank homes were roofed with tile and shake profiles that manufacturers stopped making decades ago. Matching them requires sourcing reclaimed materials or installing a code-compliant alternative that preserves the home’s character, especially in the historic districts.
See the difference
Before
After
Before
After
Before
AfterPricing for Roof Replacement in Burbank, CA
A typical shingle replacement on a 1,500 sq ft Burbank home runs $12,000 – $16,000. Flat roofs run $11,500 – $18,500. Hillside tile or shake replacements with Class A fire-rated assemblies start around $18,000 and can exceed $30,000 depending on pitch, access, and structural decking repairs. Decking replacement adds $3 – $5 per square foot when rot is found. Discontinued tile matching adds cost because sourcing reclaimed material is time-intensive. The estimate you get from us is a written, line-item quote, not a guess. Call (833) 589-7971 to schedule a free estimate and we’ll walk the roof with you before we price it.
Working on a Tight Burbank Lot
Burbank is dense. The flats pack bungalows and ranches tight against each other, and the hillside streets are narrow, winding, and steep. A roof replacement here isn’t just about roofing; it’s about staging, parking, noise, and staying on the right side of the neighbors. On a steep Chandler Park-area street above Glenoaks, our crew replaced a wind-damaged wood-shake roof, stripping to the decking, laying a fire-rated underlayment assembly with ice and water shield in the valleys, and setting new drip edge and ridge vent. Because the lot was tight and the truck had to stage on a narrow slope, we timed tear-off and material drops into one window and gave the shared-wall neighbor notice before the dumpster landed. The finished roof passed its final inspection as a Class A assembly, and the homeowner’s insurer accepted the documentation.
That’s how we approach every Burbank job. If you have a shared wall, we give notice before the dumpster arrives and before we start air-nailing at 8 a.m. If the street has work-hour ordinances, we know them. If the property sits in an overlay district, we flag it before the permit does. Access shapes the quote, so we talk about staging and parking during the estimate, not after the contract is signed.
We Also Serve Cities Near Burbank
Our crews work across Burbank and the surrounding neighborhoods, including Universal City, North Hollywood, Glendale, and Studio City. If your roof is in one of those areas and you’re weighing a repair against a full replacement, we’ll give you the same straight answer we give Burbank homeowners: what it needs, what it costs, and nothing more.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Burbank
Yes, in most cases. Burbank’s hillside neighborhoods above Glenoaks sit in a wildfire-interface zone, and the city’s building code requires Class A fire-rated roof assemblies for replacements in those areas. That means fire-rated underlayment, specific venting and edge details, and documentation your insurer will want to see. We pull the permit, install the assembly, and give you the paperwork your carrier needs. Call (833) 589-7971 for a free estimate on your specific hillside roof.
It affects staging, waste removal, and sometimes scaffolding. A lot where the dumpster can’t sit adjacent to the house, or where materials have to be hand-carried up a narrow hillside street, adds labor time and sometimes equipment rental. We price that during the initial walk, not as a change order later. If you have a shared wall, the neighbor gets notice before the dumpster drops, and we keep the site clean every day. Call (833) 589-7971 and we’ll walk your lot and give you a line-item quote.
Often yes. We source reclaimed tile from local architectural salvage yards and we’ve matched profiles on bungalows across the 91501, 91502, and 91505 flats. Matching takes longer and costs more per square foot than a new tile or shingle system, so we’ll show you both the match option and the code-compliant alternative and let you decide. Estimates are free; call (833) 589-7971.
One square is 100 square feet of roof area. When we quote a Burbank roof replacement, the line items show the number of squares, the material type, and the cost per square. That’s how you compare bids apples-to-apples. We walk the roof with you before quoting so the square count is based on actual measurements, not a satellite photo guess. Call (833) 589-7971 for a measured, line-item estimate.
We do it on every job. Burbank has specific construction work-hour ordinances, and we run our tear-off and installation inside those windows. We give shared-wall neighbors notice before the dumpster arrives, we keep the street and sidewalk clear of debris each day, and we let adjacent homeowners know if any part of the work touches a shared roof, wall, or boundary. It’s part of working in a city this dense, and it’s why our Burbank jobs rarely produce neighbor complaints. Call (833) 589-7971 to schedule a free estimate and we’ll talk through access and logistics for your specific street.
Get Your Burbank Roof Replacement Estimate
You’re making a serious financial decision on a roof you’ll live under for 20 to 30 years. We’ll give you real material options from seven leading brands, a written line-item quote, and an honest read on what your roof actually needs. From the first inspection to the final nail, we handle it start to finish. Call (833) 589-7971 to schedule your free Burbank roof replacement estimate.
Written by Roland Vega, Owner at Hollywood Roofing Co, serving Burbank and the San Fernando Valley.