Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Azusa
A full roof replacement in Azusa typically runs $14,500 to $38,000 depending on square footage, material tier, and whether you’re on the flatland or in the foothills. Most of the homes we re-roof in 91702 are 1950s to 1990s tract stock, and the work usually takes three to seven days once materials are on site. We’ve been pulling permits in Azusa long enough to know the city’s split-code reality: standard re-roofs on the flat, fire-rated assemblies above Foothill Blvd. Call (833) 589-7971 and we’ll give you a straight answer about which path your home falls under.
Why Hollywood Roofing Co Is Azusa’s Preferred Roof Replacement Company
We work across seven major roofing brands: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That means when we quote a re-roof in Azusa, the recommendation is matched to your home’s exposure and your budget, not to whatever a single supplier happens to stock. Homeowners along the Foothill Blvd corridor need Class A assemblies and ember-resistant venting. A flatland tract home in 91702 may not. One company should be able to handle both without blinking.
Azusa homeowners call us because we treat a roof as a long-term asset, not a one-and-done transaction. The same team that inspects your roof can repair it or replace it, so there’s no handoff gap when a small problem turns into a full redeck. Roof Replacement is our core service, but we’ll tell you honestly if your roof has five more years in it. Know exactly what your roof needs, nothing more.
Roland Vega leads our team, and he’s the one who walks Azusa roofs and writes the scope. If you’ve got a 1950s ranch in the foothills with cracked concrete tile and Santa Ana exposure, he’ll talk to you about fire-rated underlayment before he talks to you about shingle color. That’s the order of operations that protects your home.
Styles & brands we work with






Roof Installation in Azusa
Roof installation in Azusa means new sheathing or decking, underlayment, drip edge, vents, and the finished surface: architectural asphalt shingles on most flatland homes, lighter-weight composite or standing seam on hillside properties where radiant heat and ember exposure are real concerns. A standard roof installation on a 1,400 to 1,800 square foot ranch in 91702 runs $12,000 to $22,000. Hillside homes with fire-rated assemblies start around $18,000 and climb from there based on decking condition, pitch, and material tier.
Full Tear-Off vs. Re-Cover
Most Azusa homes built before 1990 have one layer of roofing, which means a full tear-off to decking is standard. Re-covers over existing shingles are legal in some flatland cases but we rarely recommend them: the added weight shortens the life of the new roof and hides decking rot until it becomes structural.
Fire-Rated Installations Above Foothill Blvd
Homes in the foothill and canyon pockets above Foothill Blvd are now under fire-rated assembly requirements for re-roofs. That means Class A rated materials, fire-resistant underlayment, and ember-resistant venting. We pulled permits on a 1960s ranch above Foothill Blvd where the original low-pitch tile had cracked and the Bobcat Fire corridor was a real exposure concern. We stripped to decking, installed a Class A assembly with fire-rated underlayment and ember-resistant ridge venting, and coordinated architect-specified copper flashing with a six-week lead time. The price was locked in writing before the metal was released.
Roof Replacement Contractor in Azusa
A roof replacement contractor in Azusa has to work two different code books in the same day. Flatland tract homes in 91702 pull standard permits. Hillside homes above Foothill Blvd pull fire-rated assemblies and ember-resistant vent requirements. We handle both, and we’ll tell you at the estimate stage which path your roof is on, because discovering it mid-permit is how five-figure change orders happen. A standard architectural shingle replacement on a 1950s to 1990s tract home in Azusa runs $14,500 to $24,000, while foothill replacements with Class A assemblies and custom flashing start around $22,000 and can reach $38,000 on larger custom homes.
Decking Verification Before Ordering
On 1950s wood-frame homes, we check decking before we order architectural shingles and custom flashing. Last-minute square-count changes are the main reason re-roofs slip schedule. If your decking has water damage around the valleys or eaves, we factor that into the written scope before the first material is released.
Flashing and Fascia on Older Foothill Homes
Mismatched drip edge and valleys on older foothill homes don’t show up as a problem until the first Santa Ana rain. We match new metal to existing fascia and soffit lines, and on high-end work we’ll coordinate directly with your architect or designer. Custom copper flashing and specialty fascia trim have lead times of four to eight weeks. Lead times, not labor, drive the calendar on this tier of work.
Trusted Brands We Service in Azusa
We’re authorized installers for GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Seven leading brands, one honest recommendation. For Azusa’s flatland tract homes, a GAF Timberline or CertainTeed Landmark architectural shingle is often the right balance of wind rating and cost. For hillside homes where radiant heat and ember exposure matter, we’ll look at Atlas StormMaster or Boral concrete and composite options. Because we install all seven, the conversation stays about your home’s needs, not a supplier’s inventory. We stock common parts and fasteners for Azusa jobs locally, which keeps turnaround tight when a permit gets approved and the tear-off starts.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Azusa Homes
- Fire-rated assembly requirements missed at bid stage. A hillside re-roof bid with standard underlayment and venting may pass an initial estimate, but the city’s fire-rated requirement surfaces at permit review. That’s a costly change order, and we catch it before the bid is signed.
- Decking rot on 1950s wood-frame homes. Flatland tract homes from the 1950s and 1960s often have decking delamination around valleys, eaves, and pipe penetrations. If we don’t strip and check before ordering, square-count changes hit mid-job.
- Drip edge and fascia mismatch on foothill ranch homes. Older foothill homes have non-standard fascia and soffit lines. New drip edge and valleys that don’t match the existing lines create water intrusion that only shows up after the first Santa Ana rain.
- Ember exposure in canyon pockets. Homes in the canyon pockets northeast of Foothill Blvd sit in the Bobcat Fire corridor. Cracked concrete tile and open ridge vents are ember entry points. Class A assemblies and ember-resistant venting are the fix, and they’re not optional for these homes.
Pricing for Roof Replacement in Azusa, CA
Here’s what we see in the Azusa market right now. A flatland tract home in 91702 with architectural asphalt shingles runs $14,500 to $24,000 for a full tear-off and re-roof. Concrete or composite tile on the flat starts around $18,000 and climbs with square footage. Hillside homes above Foothill Blvd with Class A fire-rated assemblies, ember-resistant venting, and custom flashing start around $22,000 and reach $38,000 on larger custom homes with architect-specified metal work. The biggest cost variables are decking condition, pitch, and long-lead flashing or specialty finish material. Call (833) 589-7971 for a precise written quote. Estimates are free, and we’ll tell you up front if your roof falls into the fire-rated code path.
We Also Serve Cities Near Azusa
Hollywood Roofing Co serves Roof Replacement in Azusa and the surrounding foothill communities. If you’re in Citrus, Irwindale, Covina, or Glendora, you’re dealing with the same Santa Ana wind corridor and the same 1950s to 1990s tract stock. Call us and we’ll come out for a look, whether you’re on the flat or in the hills.
Serving Azusa, CA — Our Local Coverage Area
We’re based in the Azusa area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Azusa
Yes. Hillside and canyon homes above Foothill Blvd are now under fire-rated assembly requirements for re-roofs, which means Class A rated materials, fire-resistant underlayment, and ember-resistant venting. Flatland tract homes in 91702 can still pull a standard permit. We’ll tell you which code path applies to your address at the estimate stage, before you sign anything. Call (833) 589-7971 and we’ll check your property’s specific requirement.
Custom copper flashing and specialty fascia trim have lead times of four to eight weeks. Architectural shingles are typically in stock or available within a few days. On high-end Azusa re-roofs, the flashing order sets the calendar, not labor. We lock the price in writing before the metal is released, so the six-week wait doesn’t turn into a price escalation. Call (833) 589-7971 if you’re planning a re-roof with architect-specified finishes.
Yes. We match new drip edge, valleys, and fascia metal to the existing fascia and soffit lines on older foothill ranch homes. The goal is a clean fit that drains properly, not just a generic metal profile. On homes where the existing fascia is non-standard, we’ll order custom-bent metal and coordinate with your architect. Call (833) 589-7971 for an on-site evaluation.
Ask how many squares are in the written scope, and ask whether decking condition was verified before the square count was locked. If the quote is based on a satellite measurement without a decking check, expect the square count to change mid-job. We verify decking on 1950s wood-frame homes before ordering, so the number in the written quote is the number we build to. Call (833) 589-7971 and we’ll walk the roof with you.
Yes. On high-end foothill and canyon re-roofs, we coordinate directly with your architect or designer on flashing profiles, fascia trim, and material finishes. We pulled permits on a 1960s ranch above Foothill Blvd where the architect specified copper flashing with a six-week lead time. We locked the price in writing before the metal was ordered, and the schedule was set by the flashing, not labor. Call (833) 589-7971 to discuss your project.
If you’re in Azusa and ready for a straight answer about your roof, call (833) 589-7971. We’ll walk it, tell you exactly what it needs, and give you a written quote that holds. From the first inspection to the final nail.
Written by Roland Vega, Owner at Hollywood Roofing Co, serving Azusa and the San Gabriel Valley.