Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Murrieta
Roof repair in Murrieta typically costs between $450 and $2,800 depending on what failed, and most jobs we schedule in 92562, 92563, and 92564 are completed within one to three days once approvals clear. We work across Murrieta’s tract neighborhoods, foothill estates, and detached condos, so we know what the HOAs require before a single tile comes off. If you’ve got a leak, lifted flashing, or wind damage from the last Santa Ana event, call (833) 589-7971 and we’ll walk the roof with you.
Hollywood Roofing Co has spent years working on the production homes that define Murrieta’s housing stock, which means we already know the tile profiles, underlayment failures, and architectural-review requirements before we even pull up the ladder. That local knowledge keeps your repair moving instead of stalling on paperwork or a mismatched tile order.
Why Hollywood Roofing Co Is Murrieta’s Preferred Roof Repair Company
Hollywood Roofing Co carries authorized-installer status across seven major roofing brands: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That breadth matters in Murrieta because most 1990s communities were built with a specific concrete tile that is now discontinued, and you need a contractor who can source from the original manufacturer’s remaining stock rather than shrug and propose a full re-roof in a different material.
Our crews know the tracts off Clinton Keith Road, the two-story stucco-and-tile estates rising into the foothills near Murrieta Hot Springs, and the detached condos scattered through central 92562. When a Murrieta homeowner shows us wind-lifted tile after a fall wind event, we already know what the underlayment underneath probably looks like. When they mention their HOA, we know what the submittal packet needs. That accumulated local experience is what keeps a five-hour repair from becoming a five-week approval fight.
Led by Roland Vega, our team treats Murrieta roof repair as a full-lifecycle discipline. We inspect, we repair, and when a roof has genuinely run its course, we replace it. But we never push a replacement on a roof that needs two bundles of tile and a new section of underlayment. You’ll get the same honest condition report a homeowner gets anywhere else we work across Southern California.
Styles & brands we work with






Storm Damage Roof Repair in Murrieta
Storm damage roof repair in Murrieta is almost always a Santa Ana wind story. Murrieta sits in a hot inland valley where the I-15/Temecula corridor funnels fall winds hard enough to lift concrete tile, tear flashing at roof-to-wall connections, and peel back underlayment that 30 years of inland heat has already baked brittle. The resulting damage typically costs $600 to $2,200 to repair depending on how many tiles lifted, whether valleys or penetrations were compromised, and whether the decking beneath stayed dry.
Wind-Uplift Tile Repair
When Santa Ana winds hit Murrieta’s 1990s tracts, concrete tile along ridge lines and eaves takes the brunt. The original 30-lb felt underlayment under those tiles is often baked brittle by decades of 150°F-plus roof-surface summers, so the tile doesn’t just crack, it lifts and the underlayment tears away with it. Our crews reset lifted tile, replace failed underlayment runs, and re-fasten tile to current wind-uplift standards rather than the original 1990s nailing pattern.
Flashing and Valley Repair After Wind Events
Along the I-15 corridor, wind-driven rain finds its way in through separated flashing at dormers, chimneys, and roof-to-wall transitions. Murrieta’s Mediterranean-style tracts have lots of kicked eaves and stucco wall intersections, and those transition points fail first. We replace lifted flashing, re-bed penetrations with the proper sealant, and install ice and water shield at valleys and penetrations where the original underlayment gave out.
Metal Roof Repair in Murrieta
Metal roof repair in Murrieta is less common than tile work but shows up on some of the newer detached condos and a handful of custom foothill homes that opted for standing seam or metal tile profiles. The failures we see are almost always thermal, not rust: Murrieta’s summer roof-surface temperatures above 150°F cause metal panels to expand and contract hard enough to back out fasteners, stretch panel seams, and break down sealant at laps. Typical metal roof repair here runs $500 to $1,800 depending on whether we’re replacing fasteners and re-seaming panels or pulling and reinstalling a failed section.
Fastener and Thermal Movement Repairs
Inland heat is relentless on metal roofing. Panels expand, fasteners lose their grip, and the screw heads start to pull through the panels. A homeowner in Murrieta Hot Springs or the foothills might notice oil-canning or hear the roof pop and creak in the afternoon as the panels move. Our repair work replaces failing fasteners with the correct neoprene-washered screws, re-sets panel laps, and addresses any underlying deck movement.
Seam and Penetration Re-Sealing
Metal roof leaks in Murrieta almost always trace back to a seam that separated under thermal cycling or a penetration boot that cracked. We cut out failed sealant, clean the lap, re-bed with a high-temperature sealant rated for inland sun exposure, and re-secure the panels. It’s precise work that keeps a metal roof functional through decades of summer heat and fall wind.
Trusted Brands We Service in Murrieta
Because Hollywood Roofing Co is an authorized installer across seven leading brands, including GAF, CertainTeed, and Tamko, along with IKO, Atlas, Owens Corning, and Boral, we can actually match what was on your Murrieta roof instead of saying “close enough.” That flexibility matters in Murrieta’s HOA-governed tracts, where a repair must match the community’s original tile profile and color. We stock common local profiles and have standing relationships with regional suppliers serving Riverside County, so sourcing discontinued tile doesn’t stall your project for a month. Seven leading brands. One honest recommendation, matched to your home.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Murrieta Homes
- Baked-out tile underlayment. The original 30-lb felt installed under 1990s concrete tile in Murrieta is now hitting 25 to 35 years old, and inland heat has turned much of it to paper. It tears away in chunks during Santa Ana wind events, exposing decking to rain. Repair means pulling the affected tile, replacing the failed underlayment run, and resetting tile to match.
- HOA-mandated material matching. Murrieta’s tract neighborhoods were built under architectural-review covenants that require exact tile profile and color matches. A repair that doesn’t match gets rejected, so homeowners need a contractor who can source discontinued tile from the original manufacturer’s remaining stock rather than re-roof in a new material the board will shoot down.
- Wind-uplift fastening failures along the I-15 corridor. Fall winds funnel hard through the Temecula corridor and hit roofs in 92562 and 92563 with sustained gusts that lift tile and separate flashing. Original 1990s nailing patterns often don’t meet current wind-uplift fastening standards, so repaired sections get re-fixed to modern code.
- Valley and penetration leaks in two-story estates. Murrieta’s foothill homes have complex roof lines, lots of valleys, and stacked penetrations. Valley metal corrodes over decades of sun, and penetration boots crack from UV exposure at a higher rate than coastal roofs. These are common leak sources that need targeted repair, not a full roof replacement.
Pricing for Roof Repair in Murrieta, CA
A targeted roof repair in Murrieta typically lands between $450 and $2,800. Shingle replacement runs $450 to $900 per section. Underlayment repair under a small run of concrete tile runs $800 to $1,600. Flashing replacement at a chimney, dormer, or valley lands between $700 and $1,500. Full flat roof patches in Murrieta’s detached condo complexes typically run $900 to $2,200 depending on membrane type and decking condition. What drives the higher end is HOA-mandated material matching: sourcing discontinued tile from the original manufacturer’s remaining stock costs more than buying a current production tile. Your exact quote depends on what failed and what your community’s architectural review requires. Call (833) 589-7971 for a written, line-item estimate; estimates are free.
We Also Serve Cities Near Murrieta
Our Roof Repair crews work throughout the Temecula Valley and surrounding Inland Empire. We serve Murrieta Hot Springs, Wildomar, Temecula, and Sedco Hills with the same material-breadth approach and the same attention to local architectural-review requirements. If you’re outside Murrieta proper but in the surrounding area, reach out and we’ll confirm coverage and scheduling.
Serving Murrieta, CA — Our Local Coverage Area
We’re based in the Murrieta area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Murrieta
Yes, in the vast majority of Murrieta’s 1990s tract communities, the HOA architectural review committee must approve your roof repair before any work begins. The submittal packet typically requires the repair scope, the exact tile profile and color being used, and sometimes a photo or sample of the proposed material. Hollywood Roofing Co prepares and files that packet for you so your repair doesn’t stall on missing paperwork. Call (833) 589-7971 if you need help navigating your community’s specific requirements.
Most Murrieta HOA architectural reviews add one to three weeks to a repair timeline. Some communities with active boards and monthly meetings can stretch that to four weeks if the packet misses a meeting cycle. We schedule work around the approval window, ordering materials and lining up crews so that the moment approval lands, we are on the roof within days rather than weeks. The key is filing a clean packet the first time.
Because the concrete tile itself is usually still sound; it’s the original 30-lb felt underlayment beneath it that has failed. Murrieta’s inland heat bakes that felt brittle over 25 to 35 years, and once it tears away from the decking in a Santa Ana wind event, the tile loses its waterproofing barrier. Replacing the underlayment run is far less expensive than a full tile swap and preserves the original tile profile your HOA requires.
We source discontinued tile from the original manufacturer’s remaining stock, typically through regional supply channels that maintain inventory of retired profiles. Many of Murrieta’s 1990s tracts used tile from manufacturers like Boral or CertainTeed, and some of those profiles have been out of production for over a decade. The stock still exists in distribution yards if you know where to look. We do. That’s the difference between a repair that passes HOA review and a rejected application.
We respond fast because we know that a lifted tile in Murrieta means an exposed deck by the time the next rain comes. The first step is a standalone roof inspection to document the exact scope of wind-lifted tile, torn underlayment, and separated flashing. Then we file the HOA packet if required, source matching materials, and schedule the repair. Homeowners should document wind-event dates for insurance purposes, and we provide a written scope to support your claim. Call (833) 589-7971 right after the winds die down.
If your roof is leaking, lifting, or just showing its 30 years, call Hollywood Roofing Co at (833) 589-7971. We’ll inspect it honestly, explain exactly what needs to be done, handle the HOA paperwork, and get the repair done right. Written estimates are free.
Written by Roland Vega, Owner at Hollywood Roofing Co, serving Murrieta and the Temecula Valley.