Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gutter Installation Cost in Hollywood?
Gutter installation in Hollywood typically runs $1,400 to $3,800 for a single-family home, with most jobs landing around $2,200 for seamless aluminum on a 150-foot roofline. Smaller homes and short runs can come in closer to $900, while two-story Craftsman-style properties with steep pitches, tight lots, and custom fascia work push toward $5,500 or more. Those ranges are for the full job: materials, tear-off of old gutters, hangers, downspouts, and haul-away.
We’re Hollywood Roofing Co, and we handle the roofing side of these projects. Where a gutter job involves roofline repairs, fascia replacement under the gutter line, or a full roof system, we step in. Seven leading brands. One honest recommendation. That’s how we work, and it’s the same discipline we bring to helping you understand what a gutter job in this neighborhood should actually cost.
Key Takeaways
- Most Hollywood gutter installs land between $1,400 and $3,800, with $2,200 a common midpoint.
- Seamless aluminum is the value leader at $6 to $12 per linear foot installed; copper runs $25 to $45.
- Hollywood’s stucco-and-fascia construction adds prep cost that flat-roof markets don’t see.
- Second-story access, hillside properties in the Hollywood Hills, and historic fascia repair are the biggest cost drivers.
- Repairing a section runs $180 to $600; replacing the whole run is often cheaper over a decade.
Gutter Installation Cost Breakdown (2026)
The ranges below reflect what we see across Hollywood and the surrounding blocks, from Franklin Village flats to the steep streets above Beachwood Canyon. Linear-foot pricing covers material and labor installed. Whole-job pricing includes tear-off, hangers, and downspouts.
| Line Item | Typical Hollywood Range |
|---|---|
| Seamless aluminum gutter, installed | $6 – $12 per linear foot |
| Galvanized steel gutter, installed | $10 – $16 per linear foot |
| Copper gutter, installed | $25 – $45 per linear foot |
| Downspouts | $5 – $15 per linear foot |
| Hidden hangers or spikes, replaced | $3 – $8 each |
| Leaf guards / gutter screens | $3 – $9 per linear foot |
| Tear-off and haul-away of old gutters | $150 – $500 |
| Fascia repair before install | $200 – $900 |
| Fascia replacement (rot or structural) | $600 – $1,600 |
| Second-story access or lift rental | $150 – $600 |
| Whole-house gutter install | $1,400 – $3,800 |
What pushes a Hollywood job toward the top of that range? Two-story homes nearly always do, because access is slower and safer anchoring matters more. There’s also a local quirk: many pre-war Hollywood homes have stucco faces that meet the fascia, and pulling gutter without damaging the stucco takes patience and the right tools. That’s labor, and it’s why a job here often costs more than an equivalent job in the Valley.
What keeps it down? Single-story homes, straightforward runs, standard aluminum, and doing the install at the same time as a roof replacement. When we’re already on your roof for a full replacement, coordinating gutter work into that schedule saves setup time, and it saves you a second crew’s mobilization fee.
What Affects Gutter Installation Pricing in Hollywood
- Roofline length and shape. Hollywood homes sit on compact lots, but their rooflines are often cut up with hips, valleys, and dormers. Every corner and return is a fitting, and fittings add labor and material. A simple ranch runs cheaper than a Craftsman with three gable ends.
- Access and topography. Homes above Hollywood Boulevard, especially the hillside stretches near Beachwood Canyon and the curving streets off Laurel Canyon, often need staging, lifts, or careful ladder work. Steep-slope access adds $150 to $600 on most jobs.
- Fascia condition. We pull the gutter and find what’s behind it. A lot of older Hollywood properties have fascia that’s soft near the joints because the old gutter leaked for years. Repairing or replacing it before new gutter goes up is not optional; it’s the difference between a gutter that lasts and one that pulls loose.
- Material choice. Aluminum is the workhorse. Copper lasts far longer, developing a patina that suits Craftsman and Spanish Colonial houses, but it costs three to four times as much. Steel is a middle path.
- Downspout routing. Where does the water go? In dense Hollywood blocks, discharge often has to be routed to the street or a dry-well rather than dumped at the property line. Long runs and buried extensions add cost but solve the real problem.
- Tree cover and debris load. Homes tucked against the hillside tree canopy need leaf guards more than most. The guards cost extra, but they cut the ongoing cleaning bill and protect the gutter from the annual leaf fall.
How to Save on Gutter Installation
The biggest savings come from timing and scope, not from haggling. Here’s what actually moves the number:
- Bundle gutter work with a roof replacement. If your roof is due, do both at once. The crew is already set up, and you avoid the second mobilization and the second scaffold day. If you’re already planning a full replacement, run it past us when we’re out for an inspection.
- Fix fascia before it rots through. Catching a soft fascia board early keeps repair at a few hundred dollars rather than a full replacement. If you’ve had water tracking behind the gutter, address it now.
- Choose aluminum where it fits. Copper is beautiful, but if you’re not restoring a period home, aluminum at $6 to $12 per linear foot handles Hollywood’s rain just fine and holds up for decades with proper hangers.
- Skip leaf guards if you have no overhanging trees. Many Hollywood blocks are open to the sky. If you’re not under canopy, the guards are optional.
- Get one clear, itemized estimate. A range that tells you exactly what’s included, and what’s not, lets you compare fairly. Call (833) 589-7971 for a free estimate.
How Much Does Gutter Repair Cost in Hollywood vs. Replacement?
Sectional repairs in Hollywood typically run $180 to $600, while a full replacement runs $1,400 to $3,800. Repair makes sense when the gutter is sound and you’re fixing a single loose hanger, a spliced joint, or a short run of pulled-away material. Once you’re looking at three or more leaks, sagging between hangers, or rust-through on old steel, replacement is the better use of the money. Call (833) 589-7971 and we’ll tell you honestly which one your home needs.
One thing worth noting for this neighborhood: a lot of the older gutters we see are original to the house. When a fifty-year-old gutter starts failing, patching it is usually a stopgap. The hangers were set for the house as it was built, and the wood behind them has aged. A full replacement with new hidden hangers and fresh fasteners solves the problem once.
Can You Install Gutters in Hollywood in One Day?
Yes, most single-story Hollywood gutter installs finish in a single day, and two-story jobs often span two. Seamless aluminum is fabricated on-site, which means we measure, run the gutter on the roll-forming machine in your driveway, and hang it the same visit. Steep lots and historic fascia repair can extend the schedule to two or three days, but the majority of jobs wrap fast. Call (833) 589-7971 to schedule a free estimate and we’ll give you a realistic timeline for your home.
If the job includes roof work, the schedule changes. Gutter goes on after the roof is done, not before, because the roof’s drip edge and shingle overhang set the line the gutter hangs from. When we’re managing the whole roof lifecycle, that sequencing is built in. If you want to understand the roofing side before you commit to gutter work, our home page lays out how inspection, repair, and replacement fit together, and our Gutter Installation in Hollywood page covers the install process step by step.
FAQs – Gutter Installation Cost in Hollywood
How much does gutter installation cost per linear foot in Hollywood?
In Hollywood, seamless aluminum runs $6 to $12 per linear foot installed, galvanized steel lands at $10 to $16, and copper runs $25 to $45. A 150-foot roofline in aluminum comes out around $1,400 to $1,800 before add-ons like downspouts and fascia repair. Call (833) 589-7971 for an exact quote; estimates are free.
Is it cheaper to repair or replace gutters in Hollywood?
Repair is cheaper up front at $180 to $600 versus $1,400 to $3,800 for a full install. Repair wins when the damage is isolated. Replace when you’re seeing multiple leaks, sagging, or rust-through, because repeated repairs on aging gutters add up past the cost of a new system within a few years. Call (833) 589-7971 and we’ll give you a straight answer.
How much do gutter guards cost in Hollywood?
Leaf guards and gutter screens in Hollywood run $3 to $9 per linear foot, so a 150-foot home lands around $450 to $1,350 installed. Homes under the hillside tree canopy benefit most; open lots with no overhanging branches often skip them. Call (833) 589-7971 for a bundle quote with installation.
Do I need a permit for gutter installation in Hollywood?
Most standard residential gutter replacements in Hollywood don’t require a building permit, since gutters aren’t considered a structural or electrical change. That’s a general rule, not a promise for your specific property. Historic-district homes, HOA properties, and jobs involving fascia replacement sometimes trigger review. We’ll flag anything that needs a check before work starts. Call (833) 589-7971 to talk it through.
How long do gutters last in Hollywood’s climate?
Aluminum gutters last 20 to 30 years in Hollywood’s dry, sunny climate; copper can exceed 50. The local twist is UV exposure, which eventually breaks down the sealant at joints and the paint on colored aluminum. Hollywood’s short, heavy winter rain also stresses hangers, so proper anchoring matters more than material thickness. Regular inspection after each rainy season protects the investment. Call (833) 589-7971 for a free estimate when you’re ready.
Why the Roofline and the Gutter Line Belong Together
Gutters hang from your fascia, which is attached to your roof framing. If the roof edge is compromised, the fascia softens, and the gutter sags. If the roof’s drip edge is wrong, water runs behind the gutter rather than into it. We see this often on Hollywood homes that have had patch repairs over the decades without anyone checking how the pieces fit together.
Hollywood Roofing Co builds its reputation on the full lifecycle: inspection, repair, replacement. We install material from seven leading brands, including GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, which means we recommend what fits your home and budget rather than what a single supplier wants to move. That’s the same principle we bring to gutter work. If your gutter project includes roofline repair or the roof needs attention before gutters go up, the same team handles it. No handoff gaps. No finger-pointing between contractors.
We also offer roof inspection as a standalone service, not a disguised sales appointment. If you’re unsure whether your fascia or roof edge is sound enough for new gutters, that inspection tells you honestly what you’re working with. Whether your roof needs a patch or a full replacement, we handle it start to finish, from the first inspection to the final nail.
Pricing reflects the Hollywood market as of 2026. Hollywood Roofing Co offers free estimates – call (833) 589-7971.
What Our Customers Say
"Valley had been done without proper underlayment and was leaking. Redone correctly, and he explained exactly what had been wrong so I could understand it."
— Jessica Tran"Full replacement after the hail. They handled the insurance adjuster meeting, documented everything, and I did not have to argue with anybody. Crew was here three days and the yard was cleaner when they left than when they started."
— Doug Ziegler"Went up in the attic first with a flashlight before going on the roof, which no other estimator bothered to do. Found the stain and worked backward from there."
— Norma Rodriguez