Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Hollywood?
Metal roof installation in Hollywood typically runs $18,000 to $38,000 for most single-family homes, with the average landing near $26,500 for a 1,500 to 2,000 sq ft roof with standard complexity. That works out to roughly $12 to $22 per square foot installed depending on the metal system, panel style, and how much tear-off and deck repair the job needs.
The number you’ll actually see depends on things Hollywood roofs deal with specifically: steep pitches on hillside homes above Franklin Avenue, close-quarter access on tight residential lots, and the wind-driven rain that comes off the basin. If you want to see what materials and systems we install and why the ranges fall where they do, our Metal Roof Installation in Hollywood page breaks it down in detail. Otherwise, keep reading for the full 2026 price picture.
Metal Roof Installation Cost Breakdown (2026)
Below is a real working range for Hollywood jobs. These aren’t national averages pulled off a spreadsheet; they reflect what metal roofing actually costs when a licensed crew tears off an old roof and installs a new metal system on a Los Angeles-area home.
- Material (per square foot of finished roof): $6 to $15. Painted steel and galvanized panels sit at the low end; standing-seam aluminum and coated steel run mid-range; zinc, copper, and premium standing-seam at the top. Your material brand matters too, which is why we install all seven leading systems rather than pushing one.
- Labor (per square foot): $5 to $9. Hollywood and the surrounding hills add cost here because of access, staging, and the way many homes sit on sloped lots.
- Tear-off and disposal: $1,500 to $4,500. One layer of old asphalt shingles is the easy case. Multiple layers, or shake underlayment, push this up.
- Deck repair and replacement: $500 to $3,500 depending on what’s underneath. Hollywood homes built before 1970 sometimes have soft or patched sheathing that needs replacing before metal goes on.
- Underlayment (high-temp synthetic or peel-and-stick): $800 to $2,400. Not optional in this climate. We spec high-temp because metal gets hot in direct summer sun.
- Flashing, trim, and ridge: $600 to $1,800. Every valley, chimney, skylight, and wall intersection gets its own detail work.
- Permits and inspection fees: $400 to $1,200. City of Los Angeles permits plus any HOA or historic-district review if the property is in a covered area.
- Optional: skylight replacement, attic ventilation, snow guards (rarely needed here), solar prep: $300 to $2,500 depending on scope.
A typical Hollywood home ends up around $26,500 for a mid-grade standing-seam steel system with straightforward access. Homes on steep hillside lots or with significant deck repair land closer to $38,000. Simple garage or small-roof projects can come in under $15,000, but those aren’t the norm on a full house.
What Affects Metal Roof Installation Pricing in Hollywood
- Roof pitch and complexity. A steep pitch slows the crew and requires more safety rigging. Hollywood has plenty of steep roofs, especially in the hills above Sunset and in the narrow streets around Beachwood Canyon, and that pushes labor cost toward the top of the range.
- Access and staging. Tight lots, hedges, gated driveways, and street parking restrictions all add time. On some Hollywood blocks, driving a dumpster in is half the battle.
- Roof size. The obvious driver. A 1,200 sq ft bungalow in Los Feliz and a 3,000 sq ft home in the Hollywood Hills are two different budgets. Square footage plus the actual roof geometry (not the home’s floor plan) is what we measure.
- Existing roof layers. Tearing off one layer of shingles is routine. Two or three layers, or an original wood shake roof, adds both labor and dump fees.
- Material choice. Standing-seam steel and aluminum run mid-range. Copper can double the material cost. Budget-friendly painted steel panels are the lowest-cost entry point that still performs.
- Local code and historic considerations. Hollywood has pockets of historic designation, HOA overlays, and City of LA requirements around wind uplift, fire-rated materials (important in hillside fire zones), and permit inspections. Any of those can add review time and paperwork.
Because we install materials from seven brands (GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral), the recommendation here is matched to what your roof actually needs rather than what a single supplier wants to move. That usually moves the final number down, not up.
How to Save on Metal Roof Installation
There’s no trick to getting a good price on a metal roof, but there are a few practical moves that consistently save Hollywood homeowners real money.
- Get an honest condition report first. A dedicated roof inspection tells you whether you need a full replacement now or a targeted repair that buys you a few years. Knowing this before you commit to a full metal system prevents overspending.
- Fix small problems before they compound. A roof repair for a failing valley or a damaged flashing costs hundreds, not thousands. Skip it and it becomes deck rot, which adds real dollars to a replacement.
- Choose the right material tier. Painted steel panels perform well in Southern California and cost notably less than copper or zinc. If your roof isn’t architecturally suited to standing seam, exposed-fastener panels are a legitimate option, not a downgrade.
- Bundle skylights and ventilation into the replacement. If your skylights are old or your attic ventilation is undersized, adding them during the metal install is far cheaper than a separate job later.
- Ask about timing. Roofing crews are busier in spring and early summer. Scheduling a replacement in late fall or winter can sometimes work in your favor.
- Get a written, itemized estimate. A real quote shows tear-off, materials, labor, and permit fees as separate lines. That transparency lets you compare apples to apples instead of guessing.
Call (833) 589-7971 for a free estimate. We’ll walk the roof, show you what’s actually there, and give you a documented price you can compare against anything else you’ve been quoted.
FAQs – Metal Roof Installation Cost in Hollywood
Is a metal roof worth the cost in Hollywood?
Yes, for most homeowners who plan to stay in the home more than 10 years. Metal roofs last 40 to 70 years, compared to 15 to 25 for asphalt shingles, and the higher upfront cost ($18,000 to $38,000 versus $9,000 to $18,000 for shingle) is usually recovered over time by longevity and lower cooling bills in Hollywood’s heat. If you’re selling in the next few years, ask us for a straightforward cost comparison.
How much does metal roof installation cost for a 1,500 sq ft house in Hollywood?
Typically $18,000 to $26,000 for a 1,500 sq ft roof with standard pitch and one layer of tear-off. Tight access, deck repair, or premium standing-seam systems push it toward the higher end. Call (833) 589-7971 for a specific number on your home.
Can you install a metal roof over existing shingles to save money?
Sometimes, yes, and it can save roughly $1,500 to $4,000 in tear-off and disposal costs. But it’s not always a good idea. You lose the chance to inspect and repair decking, you add dead load, and local code doesn’t allow it in every situation. We’ll tell you honestly whether it’s the right call for your roof. Estimates are free – call (833) 589-7971.
Does a metal roof raise homeowner insurance premiums in Hollywood?
Often it lowers them. Many carriers discount for impact-resistant and fire-rated metal systems, especially in fire-rated hillside zones. The exact effect depends on your insurer and policy. We can tell you which classifications the systems we install carry, so you can check with your carrier before you commit.
How long does a metal roof installation take and does it affect price?
Most Hollywood homes take 3 to 7 days for tear-off and install, depending on size and complexity. Time itself doesn’t usually change the price – the quoted cost is for the completed job – but unusually steep or complex roofs take longer and fall at the higher end of the range. Call (833) 589-7971 if you need a timeline for your specific roof.
Why Hollywood Roofing Co for Metal Roof Installation
We offer three services that cover the full life of a roof: home-level inspection, repair, and replacement. That matters here because the same team that inspects your roof is the team that repairs or replaces it. No handoffs, no finger-pointing between contractors, no separate quotes to chase down.
We’re not locked into one manufacturer. We install GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral because the right system depends on your roof, your budget, and the local conditions. That’s the whole reason we keep all seven available – so the recommendation is matched to your home, not to what a supplier wants to clear.
If you’re not sure whether you need a full replacement or a repair, an honest starting point is a dedicated roof inspection. That gives you a real condition report you can act on at your own pace – not a sales pitch disguised as an estimate. From there you can decide whether you want a targeted roof repair or a full roof replacement.
Ready to move forward? Call (833) 589-7971 for a free estimate on metal roof installation in Hollywood. We’ll measure the actual roof, explain the material options, and hand you a written price you can hold us to.
Pricing reflects the Hollywood market as of 2026. Hollywood Roofing Co offers free estimates – call (833) 589-7971.
What Our Customers Say
"Full replacement after the hail. They handled the insurance adjuster meeting, documented everything, and I did not have to argue with anybody. Crew was here three days and the yard was cleaner when they left than when they started."
— Doug Ziegler"Went up in the attic first with a flashlight before going on the roof, which no other estimator bothered to do. Found the stain and worked backward from there."
— Norma Rodriguez"Roof is solid and the price was competitive. The job ran a day over because of weather, which is nobody's fault, but I would have liked a call about it rather than noticing the crew hadn't shown up."
— Darius Prince