Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Redondo Beach
A full roof replacement in Redondo Beach typically runs $14,000 – $28,000 for a standard single-story home, with flat and low-slope roofs on older 90277 homes landing between $12,000 and $24,000 depending on decking condition and the hardware spec you choose. We serve all of Redondo Beach, from the Hollywood Riviera down through south Redondo, and we know what the marine layer does to a roof over time. If you’re weighing repair against replacement on a mid-century bungalow near the Esplanade or a two-story remodel in 90278, call (833) 589-7971 and we’ll give you an honest assessment, not a sales pitch.
Why Hollywood Roofing Co Is Redondo Beach’s Preferred Roof Replacement Company
Redondo Beach roofs fail differently than roofs ten miles inland. We’ve torn off enough salt-corroded underlayments here to know exactly what to look for, and that local knowledge shapes every estimate we write. Homeowners in the Hollywood Riviera, the Avenues, and the TRW tract don’t need a roofer who treats the South Bay like any other job. They need someone who specs stainless fasteners as a default and knows which roof-to-wall transition details leak first on a 1980s addition.
Our reputation in Redondo Beach comes from doing the unglamorous work correctly. We check fastener integrity, not just surface condition, because that’s where hidden damage lives in a coastal climate. We also carry the full Roof Replacement depth across seven major brands, so when you sit down with Roland Vega to review options, the material conversation is driven by your home’s exposure and your budget, not by what one supplier wants to move.
Response time to Redondo Beach matters when you’ve got a failed flashing and water coming through a bedroom ceiling. We schedule inspections in Redondo Beach within days, not weeks, and we show up with a plan that covers the roof’s full lifecycle, from inspection through replacement.
Styles & brands we work with
Reroofing in Redondo Beach
Reroofing in Redondo Beach means a full tear-off to the decking on most homes, not a cheap overlay. The city’s housing stock, dominated by 1950s-60s single-story stucco bungalows and ranch homes in 90277, often sits on original tar-and-gravel or built-up roofs that have absorbed decades of salt air. Overlays hide the damage. You need a tear-off so we can see what the fasteners and flashings actually look like.
Full Tear-Off and Decking Inspection
Once the old roof is off, we walk the decking with you before anything goes back on. On Redondo Beach homes within a mile of the water, we almost always find corroded fasteners and soft decking at the perimeter. Replacing roof decking in Redondo Beach typically adds $2,500 – $6,000 depending on how many sheets are compromised, and it’s the difference between a roof that lasts 20 years and one that fails at year five.
Material Selection for Coastal Exposure
Asphalt shingles and architectural shingles both work in Redondo Beach, but the fasteners and underlayment matter more than the shingle itself. We default to stainless or hot-dip galvanized hardware and marine-grade sealants on every coastal job. The grade difference is invisible after installation, but it’s the single biggest factor in whether your roof survives the daily marine layer. We’ll walk you through Tamko, GAF, CertainTeed, and other options matched to your pitch and exposure.
Flat Roof Replacement in Redondo Beach
Flat Roof Replacement in Redondo Beach is the most common job we do west of Pacific Coast Highway, where the low-slope and flat roofs over beach-adjacent homes in 90277 take the full brunt of salt-laden air. A flat roof replacement here runs $12,000 – $24,000 on a typical 1,200 – 1,800 square foot home, with the spread driven by decking condition, insulation requirements, and the type of system you choose.
Built-Up and Tar-and-Gravel Tear-Offs
Most of the flat roofs we replace in Redondo Beach are aging built-up or tar-and-gravel systems from the 1950s through 1970s. These roofs fail at the flashings first, but by the time you see the leak, the underlayment fasteners are usually rusted through. We tear off to the decking, install a self-adhered ice and water shield, and rebuild the system with marine-grade components. It’s the only way to beat the salt.
Reflective and Coated Systems
For newer flat roofs or remodels in 90278, we often recommend a reflective single-ply or coated system rated for coastal exposure. These handle Redondo Beach’s UV and salt better than older asphalt-based systems, and they cut cooling costs during the dry summer months. The upfront cost runs toward the top of the range, but the maintenance cycle is longer and the energy math works in your favor.
Trusted Brands We Service in Redondo Beach
We install across seven major roofing brands, which means your Redondo Beach roof replacement isn’t locked into whatever one supplier stocks. GAF and CertainTeed sit at the premium end for architectural shingles, Tamko covers the value tier without cutting corners on coastal hardware, and we also work with Boral for tile options on hillside homes that need wind resistance. We keep common fasteners and flashing components on hand for coastal jobs, so turnaround on Redondo Beach replacements doesn’t stall waiting on parts.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Redondo Beach Homes
- Corroded underlayment fasteners: The marine layer’s salt air rusts standard galvanized fasteners within a decade, even when the shingles above them look untouched. By the time a leak shows inside, the decking is usually soft and the fastener heads have disintegrated.
- Failed roof-to-wall flashings on two-story additions: The 1980s-90s remodels scattered through 90278 and the hillside streets above the Riviera often used sealant-heavy transition details. UV and salt break those sealants down, and water gets in where the addition meets the original roof line.
- Santa Ana wind damage on windward slopes: After a strong Santa Ana event, we find lifted or cracked tiles and loosened flashing on the west-facing and ridge-exposed sides of homes throughout Redondo Beach. The visible damage is one problem; the corroded fasteners underneath are the one that’ll leak next rain.
- Flat roof blistering and ponding: Low-slope roofs on 1950s bungalows in 90277 tend to hold water at the drains and blister under coastal UV. Once water ponds and the surface blisters, the underlying felt has usually begun to rot.
Pricing for Roof Replacement in Redondo Beach, CA
Here’s what you’ll actually pay in Redondo Beach’s market, not a national average. A standard asphalt shingle roof replacement on a 1,400 – 1,800 square foot single-story home runs $14,000 – $22,000. Architectural shingles add $2,000 – $5,000. Flat roof replacement runs $12,000 – $24,000. Roof decking replacement adds $2,500 – $6,000 when sheets are rotted from salt exposure. The coastal hardware spec (stainless fasteners, marine sealants, upgraded drip edge) adds $800 – $1,800 upfront, and it’s the cheapest money you’ll spend on this project. Call (833) 589-7971 for a written line-item quote. Estimates are free, and we show you exactly where every dollar goes.
We Also Serve Cities Near Redondo Beach
Our roofing crews work throughout the South Bay, not just Redondo Beach. We handle roof replacements in Hermosa Beach, Palos Verdes Estates, Manhattan Beach, and Marina del Rey, which means we understand how coastal conditions shift from the beach cities up to the Palos Verdes hills. Same coastal hardware specs, same local crews, same accountability on every job.
Serving Redondo Beach, CA — Our Local Coverage Area
We’re based in the Redondo Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Redondo Beach
Because the salt-laden marine air in Redondo Beach corrodes standard galvanized fasteners in under a decade, while stainless or hot-dip galvanized hardware lasts the full life of the roof. The corrosion happens under the shingles where you can’t see it, so a roof can look fine while its fasteners are rusting through. This is the single highest-value upgrade on any coastal roof, and it adds roughly $800 – $1,800 to a full replacement. Call (833) 589-7971 to get an exact number for your roof.
The coastal spec swaps standard fasteners for stainless or hot-dip galvanized, standard sealants for marine-grade, and standard drip edge for marine-grade or powder-coated versions, which adds $800 – $1,800 to a Redondo Beach job. The inland spec costs less on day one but typically needs fastener and flashing replacement within 10 – 12 years in this climate. The price gap is real, and so is the math: the cheap spec costs more within a decade. We’ll show you both options plainly and let you decide, but we won’t recommend the inland spec west of PCH.
Look beyond the lifted or cracked tiles you can see from the ground; the real damage is corroded fasteners and loosened flashing on the windward side, which only a roof inspection from the deck level will reveal. After a Santa Ana event, we check the windward slope systematically: tile and shingle adhesion, flashing tightness at roof-to-wall transitions, and fastener condition under the surface layer. If you’re in the Hollywood Riviera or south Redondo, call (833) 589-7971 and we’ll schedule the inspection before the next rain finds the gap.
Yes, and we do it regularly in Redondo Beach using reflective single-ply systems, coated built-up roofs, and self-adhered underlayments rated for coastal exposure. The key is pairing the right membrane with stainless fasteners and marine-grade flashings, because the membrane is only as good as what’s holding it down. Flat roof replacement in Redondo Beach runs $12,000 – $24,000 depending on size and decking condition. Call (833) 589-7971 for a line-item quote on your building.
We tear off the affected transition area, rebuild the flashing with marine-grade metal and stainless fasteners, and seal the junction with a marine-grade product that won’t break down under Redondo Beach’s UV and salt exposure. The leak is almost always at the point where the addition’s roof plane meets the original wall, and the original builder’s sealant has long since failed. It’s a detail-heavy fix that’s invisible when done, but it stops the leak permanently. Call (833) 589-7971 and we’ll assess your addition’s transitions specifically.
Written by Roland Vega, Owner at Hollywood Roofing Co, serving Redondo Beach and the South Bay since day one.