Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Stanton
Roof repair in Stanton typically costs $350 – $900 for targeted fixes like flashing or shingle replacement, while full tear-off and resheet work on older postwar tract homes runs $6,000 – $14,000 depending on pitch, decking condition, and material choice. We serve the 90680 area and respond to most leak calls within one to two business days. If you’re seeing water stains on a ceiling or cracked shingles after a heat wave, call us at (833) 589-7971 and we’ll send someone who knows Stanton’s roofs, not a generic crew learning your street on the day of the appointment.
Our Roof Repair team works on the blocks between Beach Boulevard and Western Avenue, from Cerritos Avenue down past Orangewood. We’re familiar with the tight side yards, the flat carports, and the original low-slope roofs that define Stanton’s housing stock. When the inland heat splits your decking before your shingles fail, that changes the repair. We plan for it from the first inspection.
Why Hollywood Roofing Co Is Stanton’s Preferred Roof Repair Company
Roland Vega built Hollywood Roofing Co on a simple idea: homeowners deserve a straight answer about what their roof actually needs. In Stanton, that means knowing when a repair is enough and when the decking under the shingles has already failed. We don’t sell full replacements because it’s easier for us. We tell you what the roof tells us.
Stanton homeowners come to us for the same reasons they stay: we show up when we say we will, we write line-item quotes, and we pull permits when the job calls for one. We also carry OEM parts and materials for seven major brands, including GAF, CertainTeed, and Owens Corning, so if your existing roof is under a manufacturer’s warranty, we can often repair it without voiding that coverage. Not every company in the 90680 can say that.
Our reviews from Stanton customers mention the same things: the crew protected the neighbor’s roofline, the job site was clean, and the repair held through the next winter storm. That’s the bar. Not a tagline.
Key Takeaways
- We repair and replace roofs on Stanton’s 1950s – 1970s tract homes with close-roofline conditions and small-lot access.
- We’re authorized installers for GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so material choice is matched to your home, not a supplier’s inventory.
- Roof Inspection is a standalone service, not a sales call. You get an honest condition report you can act on when you’re ready.
- Call (833) 589-7971 for a free estimate. We’ll quote your repair in writing before any work begins.
Styles & brands we work with






Metal Roof Repair in Stanton
Metal Roof Repair in Stanton usually addresses corrosion damage caused by salt air and decades of UV exposure, not impact or wind. The ocean is roughly ten miles away, and on still summer mornings that marine layer drifts inland over the 22 freeway corridor and settles over the low-slope metal patio covers and carport roofs that sit on nearly every block of Stanton’s postwar tracts. We see rusted fasteners, failing seam sealant, and corroded flashing around chimney bases and edges long before the metal panels themselves fail.
Replacing Rusted Fasteners and Flashing
A common repair on Stanton metal roofs is swapping out standard galvanized screws and nails for stainless or hot-dip galvanized coastal-rated fasteners. The old hardware rusts first, holds moisture against the panel, and rots the rubber washers until water rides the screw threads straight into the kitchen. We remove the failed fasteners, treat the surrounding metal, and re-fasten with sealed washers rated for salt-exposed environments.
Sealant and Penetration Repairs
Years of inland heat bake the elastomeric sealant around pipes, vent boots, and ridge caps until it shrinks and cracks, then the next winter storm does its work. We cut out the old sealant, clean the seam, and re-apply a marine-grade product that flexes with the thermal cycling Stanton roofs experience between August afternoons and January rain.
Metal roof repair on a Stanton patio cover or carport typically runs $450 – $1,200 depending on how many fasteners and linear feet of flashing need attention. Full panel replacement on a badly corroded section can push toward $2,500 – $4,000. Most jobs are a half-day for our crew.
Commercial Roof Repair in Stanton
Commercial Roof Repair in Stanton usually means flat or low-slope membrane work on the small retail strips, auto shops, and medical offices that line Beach Boulevard and Katella Avenue, or the older tilt-up buildings in the industrial pockets east of the 22. These roofs fail differently than homes: ponding water, failed seams, and membrane punctures from HVAC service visits cause most of what we repair.
Flat Roof Patching and Membrane Sealing
When a flat roof membrane splits along a seam, water pools and that’s where the ceiling stains appear inside. We patch the split, seal the seam, and check the decking below for dry rot, which is common in Stanton’s older buildings where original built-up roofing was never properly sloped. A targeted patch runs $600 – $1,500; a larger section of new TPO or modified bitumen over a core area can reach $4,000 – $9,000 depending on square footage.
Drainage Correction
Many Stanton commercial roofs were originally designed with minimal slope, and after decades of settling, low spots hold water long after the rain stops. That standing water degrades the membrane and shortens the life of any repair. We can add tapered insulation or adjust flashing to direct water toward the existing drains. Because we also install GAF and CertainTeed commercial membrane systems, we can match the repair to the original material rather than layering a new system over an old one that’s incompatible.
Trusted Brands We Service in Stanton
We service and install roofing systems from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. For Stanton’s low-slope and flat roofs, that often means Boral’s clay and concrete tile systems for re-roof projects or GAF TPO and modified bitumen for commercial and patio work. Since we stock common repair materials and maintain relationships with local supply houses in Orange County, we can usually get Stanton jobs scheduled and completed faster than companies that have to order every flashing piece and membrane roll from out of state. Material choice is matched to your roof’s pitch, your exposure, and your budget, never to what a single distributor wants to move that quarter. Seven leading brands. One honest recommendation.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Stanton Homes
- Cracked and split skip sheathing. The 1×6 boards under many original Stanton roofs shrink and crack from decades of inland heat before the shingles fail. Repairs that only address the surface don’t last.
- Rusted carport and patio roof fasteners. Salt air drifts in from the coast and settles on low-slope metal roofs, corroding standard hardware and causing leaks that interior-spec crews never trace to the real culprit.
- Ponding on flat carports and attached patio covers. Winter rain collects in low spots on roofs that looked fine all summer. By the time water shows inside, the membrane or built-up roofing has already failed.
- Damage from tight-lot reroofing. When crews tear off on a Stanton-sized lot, debris lands on the adjacent roofline and punctures the neighbor’s shingles. We stage carefully and protect adjacent roofs as part of the job, not an afterthought.
Pricing for Roof Repair in Stanton, CA
Here’s what we see in Stanton’s market, based on the housing stock that dominates the 90680:
- Shingle replacement: $350 – $800 (individual slopes or sections)
- Leak repair and patching: $300 – $900 depending on source and access
- Flashing repair or replacement: $400 – $1,100 per penetration or length of run
- Flat roof patch (carport, patio, or porch): $600 – $1,500
- Decking repair or partial resheet: $1,200 – $4,000 depending on square footage
- Full tear-off and re-cover on a typical Stanton home: $6,000 – $14,000
What moves the number: whether your decking is cracked (common in Stanton, especially on original 1950s – 60s homes), how steep your roof is, whether your lot allows scaffolding or we’re staging in a driveway, and the material you choose. A standard GAF asphalt shingle resheet on a simple low-slope roof might come in around $7,500. A Boral tile roof on the same footprint will run meaningfully higher. Whatever the job, you get a written line-item bid before work begins, and the number doesn’t change once we start unless you add scope. Free estimates. Call (833) 589-7971 to schedule yours.
We Also Serve Cities Near Stanton
We regularly work in Stanton and the surrounding communities, including Garden Grove, Cypress, Westminster, and Midway City. If you’re on the edge of town near the Garden Grove border or over near Katella and Holder, call us. Same crew, same standard, same straight answer.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Stanton
Salt air from the coast, roughly ten miles away, corrodes the standard galvanized nails and flashing on low-slope carport and patio roofs in Stanton, causing failures that are invisible from below until rain finds the path. We replace the rusted fasteners with coastal-rated hardware and reseal the seams. Call (833) 589-7971 for an exact diagnosis, free estimates included.
Most repairs don’t require a tear-off. You can patch a section of shingles, a flat-roof membrane, or a flashing point without removing the entire roof. The exception is when the decking underneath has failed, which happens often in Stanton’s original 1950s and 60s homes where the 1×6 skip sheathing cracks before the shingles fail. We only recommend removing what’s necessary. Call (833) 589-7971 for an honest assessment, with no charge for the estimate.
Salt air settles on metal flashings, fasteners, and roof edges, accelerating rust on anything that isn’t stainless or hot-dip galvanized. In Stanton, that shows up as corroded nails popping shingles, rusted vent collars, and flashing that splits at the seam. We specify coastal-rated hardware even though Stanton sits inland, because the marine layer carries airborne salt far enough from the ocean to matter. A cheap inland-spec repair will often fail within five years here. Coastal-spec hardware costs 15 – 30% more up front but lasts decades. Call (833) 589-7971 to discuss your repair options.
Coastal-spec uses stainless steel or hot-dip galvanized fasteners, marine-grade sealants, and corrosion-resistant flashing. Inland-spec uses standard hardware that’s rated for dry climates. The price gap is modest, typically $150 – $500 more for a repair, but the inland-spec version on a Stanton roof will start rusting within a few years and cost you double when the same leak returns. We default to coastal-spec on every Stanton job. Get a specific quote at (833) 589-7971, free of charge.
Yes. We stage on your driveway, tarp the adjacent roofline, and route tear-off debris away from the neighboring home. That’s standard practice for us, not a premium add-on. Stanton’s zero-lot-line tracts demand it, and we’ve done enough of these jobs to know exactly where the risk points are. Call (833) 589-7971 and we’ll walk you through the staging plan before we start.
Written by Roland Vega, Owner at Hollywood Roofing Co, serving Stanton since 2012.